Dayton
Dayton 6XH84BG Belt Drive Motor Split-Phase ODP 1/4HP 1725rpm
Split-phase belt-drive motor delivers 1/4 hp at 1,725 rpm with 115 V operation and 56CZ frame
- Split-phase design provides reliable single-phase starting torque
- Dual-speed operation at 1725 and 1140 RPM for airflow flexibility
- 1/4 HP output with 1.35 service factor handles continuous duty
- Open drip-proof enclosure suits dry indoor environments
- 56CZ C-face mounting fits standard HVAC blower housings
Dayton 1/4 HP Split-Phase Motor
The Dayton 6XH84BG is a single-phase belt-drive motor rated at 1/4 horsepower with a nameplate speed of 1725 RPM. It operates on 115V AC at 60 Hz and draws 5.4 amps at full load. The open drip-proof enclosure and steel frame suit HVAC fan and blower applications in dry, ventilated spaces.
C-Face 56CZ Mounting Installation
The motor uses a C-face 56CZ frame for direct coupling to compatible driven equipment. All-angle mounting allows horizontal or vertical orientation without modification. No thermal protection is fitted, so external overload devices are required by code. The shaft rotates clockwise or counter-clockwise depending on wiring.
Continuous Duty at 40 °C Ambient
Class B insulation and a 1.35 service factor give headroom for continuous operation at up to 40 °C ambient temperature. The two-speed design also offers a 1/12 HP low-speed setting at 1140 RPM drawing 2.8 amps. It is not suited for sealed or wet locations, nor for variable-frequency drives.
Highlights
- Split-phase design provides reliable single-phase starting torque
- Dual-speed operation at 1725 and 1140 RPM for airflow flexibility
- 1/4 HP output with 1.35 service factor handles continuous duty
- Open drip-proof enclosure suits dry indoor environments
- 56CZ C-face mounting fits standard HVAC blower housings
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How do I confirm the motor is running correctly after wiring it to 115 V AC?
Measure the current draw; it should read approximately 5.4 A on the high-speed winding and 2.8 A on the low-speed winding when the motor reaches its nameplate speeds of 1725 rpm and 1140 rpm respectively.
What components are included with the 6XH84BG motor and what must be sourced separately?
The motor ships with a 56CZ steel frame, C-face mounting, and a dual-rotation shaft; you must supply the 115 V AC power circuit, overload protection, belt, pulley, and any required mounting hardware.
Which speed and horsepower combination should I select for a 1725 rpm, 1/4 hp application?
Choose the high-speed setting, which delivers 1/4 hp at 1725 rpm with a 5.4 A full-load current and a 1.35 service factor for continuous duty at up to 40 °C ambient.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
