Dayton
Dayton 6XH61 GP Motor Split Phase ODP 1/4 HP 1725 rpm 48Z
Single-phase split-phase motor delivers 1/4 hp at 1725 rpm with a 48Z frame and 230 V operation
- 1/4 hp motor delivers 1725 rpm for steady airflow
- Split-phase design runs on 230 V single-phase supply
- 48Z frame with cradle base fits standard HVAC mounts
- 35 service factor handles continuous duty at 40 °C
- Open drip-proof steel enclosure protects windings in indoor settings
Application fit
This Dayton 6XH61 general-purpose motor delivers 1/4 hp at 1725 rpm for continuous-duty HVAC tasks. The split-phase design runs on 230 V AC single-phase power at 60 Hz. It suits technicians replacing a worn drive motor in compatible air-handling equipment.
Installation notes
The cradle-base mounting and 48Z frame allow direct bolt-on replacement when the original motor shares the same footprint. A flat shaft requires a setscrew or keyed coupling; verify the driven component matches. No thermal protection is built in, so external overload safeguards must be provided by the installer.
Pre-order checks
Confirm the supply voltage is 230 V AC and the circuit can supply at least 2.5 A full-load current. Ensure the ambient temperature does not exceed 40 °C and that the open drip-proof enclosure suits the installation environment. Check that clockwise or counter-clockwise rotation meets the driven load requirement.
Highlights
- 1/4 hp motor delivers 1725 rpm for steady airflow
- Split-phase design runs on 230 V single-phase supply
- 48Z frame with cradle base fits standard HVAC mounts
- 35 service factor handles continuous duty at 40 °C
- Open drip-proof steel enclosure protects windings in indoor settings
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How can I confirm the motor is running correctly after installation?
Verify the shaft rotates at 1725 rpm and draws no more than 2.5 A at 230 V AC.
What comes with the motor and what must I supply separately?
The motor includes a cradle base and flat shaft; you must provide mounting hardware, wiring and a 230 V AC single-phase supply.
Which frame and speed rating should I select for a 1/4 hp split-phase application?
Choose the 48Z frame with 1725 rpm nameplate speed, 60 Hz operation and 1.35 service factor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
