Dayton
Dayton 6XH50 Split Phase HVAC Control 1/3HP 1725rpm
Split-phase motor drives fans and blowers at 1725 rpm with 1/3 hp from 115 V AC
- Split-phase design starts reliably on 115 V single-phase power
- 1/3 hp output drives fans and blowers in HVAC systems
- 1725 rpm speed matches common belt-drive applications
- Open drip-proof enclosure resists moisture and debris
- C-face 56CZ frame mounts directly to standard equipment
Dayton 6XH50 Split Phase Motor 1/3 HP
The Dayton 6XH50 is a single-phase split-phase motor rated at 1/3 horsepower with a nameplate speed of 1725 rpm. It operates on 115V AC at 60 Hz and draws 5.8 amps at full load. The open drip-proof enclosure and steel frame suit general-purpose indoor installations.
Installers needing a C-face 56CZ frame replacement
This motor fits equipment that calls for a 56CZ C-face mounting with a 2 7/16 inch shaft length and continuous duty cycle. It is not for applications that require thermal overload protection, a totally enclosed enclosure, or a different frame size or shaft dimension.
115V AC split-phase 1/3 HP at 1725 rpm
The critical specification is the 115V AC split-phase design delivering 1/3 hp at 1725 rpm in a 56CZ C-face frame. Matching voltage, phase, horsepower, speed and frame ensures the motor will couple and perform as the original equipment specifies.
Highlights
- Split-phase design starts reliably on 115 V single-phase power
- 1/3 hp output drives fans and blowers in HVAC systems
- 1725 rpm speed matches common belt-drive applications
- Open drip-proof enclosure resists moisture and debris
- C-face 56CZ frame mounts directly to standard equipment
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How much heat and noise should I expect from the 1/3 HP split-phase motor running continuously at 1725 rpm?
The open drip-proof enclosure and Class B insulation handle a maximum ambient temperature of 40 °C, while the 1.35 service factor gives the motor headroom for continuous duty without overheating.
What voltage supply and mounting arrangement must I already have to install this 56CZ frame motor?
It requires a 115 V AC single-phase supply and a C-face mounting surface that accepts the 56CZ frame with a 2 7/16 in shaft length.
Will the reversible CW/CCW rotation work with my existing belt-drive blower that turns one fixed direction?
Yes, the motor shaft rotation is configurable for clockwise or counter-clockwise operation to match your current blower direction.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
