We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver industrial washdown motor with TENV enclosure and 56C frame

Dayton

Dayton 6WY28 Washdown Motor 1/3 HP 1745 rpm 208-230/460V 56C Frame

SKU CH-56WW-BKN6D

Three-phase washdown motor delivers 1/3 hp at 1745 rpm in a 56C frame with 208-230/460V operation

  • TypeBrake Motors
  • TENV enclosure resists washdown moisture and contaminants
  • 1/3 HP at 1745 rpm delivers steady torque for conveyors
  • Dual 208-230/460V three-phase input suits common plant power
  • 56C face mount fits standard NEMA C-face gearboxes
  • Class F insulation handles 40 °C ambient for continuous duty

Washdown Motor 1/3 HP 56C Frame

The Dayton 6WY28 is a three-phase washdown motor rated at 1/3 HP and 1,745 RPM. Its totally enclosed non-ventilated enclosure suits wet or hygienic environments such as food processing or packaging lines. The 56C frame provides standard mounting compatibility for direct-coupled equipment.

Suits Wet Duty Excludes High Heat

This motor suits installations that need washdown-rated construction and continuous duty at 40 degrees C ambient. Buyers who need thermal protection, a higher service factor, or operation above 208 V minimum should look elsewhere. Usable at 208 V, not usable at 200 V.

Voltage 208-230/460 V Three Phase

The nameplate voltage is 208-230/460 V AC at 60/50 Hz with full-load amps of 1.4 - 1.2 / 0.6 A. This electrical specification determines whether the motor matches the available supply and starter sizing.

Highlights

  • TENV enclosure resists washdown moisture and contaminants
  • 1/3 HP at 1745 rpm delivers steady torque for conveyors
  • Dual 208-230/460V three-phase input suits common plant power
  • 56C face mount fits standard NEMA C-face gearboxes
  • Class F insulation handles 40 °C ambient for continuous duty

Specifications

TypeBrake Motors

Questions about this item

What three-phase voltage supply is required for the 208-230/460V motor?

The motor runs on 208-230V or 460V three-phase AC power at 60/50 Hz.

Will the 56C frame mount match my existing 56C gearbox?

Yes, the 56C frame follows the NEMA standard so it bolts directly to any 56C gearbox or driven equipment.

How can I confirm the motor is delivering rated output after installation?

Measure full-load current; it should read approximately 1.4-1.2A at 230V or 0.6A at 460V with the nameplate 1745 rpm under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.