Dayton
Dayton 6TWL4 1/3 HP 1100 RPM 115V 56Z ODP hvac control
A single-speed 1/3 HP PSC blower motor running at 1100 RPM on 115 V AC with auto thermal protection and a 56Z frame
- 1/3 HP PSC motor delivers reliable HVAC airflow
- 1100 RPM single-speed operation suits direct-drive blower applications
- 115 V AC, 4.7 A full-load current matches standard residential circuits
- Auto thermal protection prevents overheating during continuous duty
- Open dripproof 56Z frame mounts in any angle for flexible installation
Direct-drive blower motor
The Dayton 6TWL4 is a single-phase permanent-split-capacitor motor rated at 1/3 horsepower and 1,100 RPM on 115 V AC. It draws 4.7 amps at full load and runs continuously at up to 40 °C ambient temperature. The open dripproof enclosure and all-angle face mounting suit indoor air-handling equipment.
HVAC technicians replacing a matched PSC unit
Installers who need a direct 115 V drop-in with a 56Z frame and single-speed operation will find the specifications align. The motor is not usable at 200 V or 208 V, so sites requiring dual-voltage flexibility should look elsewhere. Buyers who need variable-speed control or a different shaft configuration cannot use this model.
Straightforward face-mount installation
The 56Z face mount bolts directly to compatible blower housings and the reversible CW/CCW rotation is set on site. Auto-reset thermal protection reduces nuisance trips during start-up. The only common issue is wiring the capacitor incorrectly, which reverses rotation or prevents the motor from reaching full speed.
Highlights
- 1/3 HP PSC motor delivers reliable HVAC airflow
- 1100 RPM single-speed operation suits direct-drive blower applications
- 115 V AC, 4.7 A full-load current matches standard residential circuits
- Auto thermal protection prevents overheating during continuous duty
- Open dripproof 56Z frame mounts in any angle for flexible installation
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What voltage supply must I already have for this 115 V motor to run?
The motor requires a 115 V AC, 60 Hz single-phase supply; it is not usable at 200 V or 208 V.
Will this open-dripproof motor fit the 56Z frame mounting on my existing blower assembly?
Yes — the 56Z frame and face-mount design match standard 56Z openings, and the all-angle mounting allows any orientation.
How can I confirm the motor is delivering its rated 1/3 HP at 1100 RPM after installation?
Measure running current at the nameplate 4.7 A and verify shaft speed reaches 1100 RPM under normal load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
