Dayton
Dayton 6K719 Farm Duty Motor 3/4 HP 1725 RPM
High-torque capacitor-start motor delivers 3/4 HP at 1725 RPM with dual-voltage 115/230 V operation and TEFC enclosure
- TypeElectrical
- High torque for tough farm jobs
- Capacitor-start design delivers strong starting power
- TEFC enclosure protects against dust and moisture
- Dual-voltage 115/230 V suits varied wiring
- Manual thermal protection prevents overheating damage
Farm Duty Motor for Agricultural Equipment
The Dayton 6K719 is a capacitor-start, single-phase motor built for farm machinery that demands high starting torque. Its totally enclosed fan-cooled design protects internal components from dust and moisture in barn or field environments. The rigid base mounting and rolled steel frame suit stationary installations on conveyors, augers or pumps.
Dual-Voltage 115/230 V Capacitor-Start Design
This motor operates on either 115 V or 230 V single-phase supply at 60 Hz, drawing 11.4 A at the lower voltage and 5.7 A at the higher. The capacitor-start winding delivers the high breakaway torque needed for loaded equipment. Manual thermal protection lets the operator reset the motor after an overload event.
3/4 HP at 1725 RPM with 1.15 Service Factor
At nameplate speed the motor produces 3/4 horsepower, while the 1.15 service factor provides a modest buffer for intermittent peak loads. Class B insulation and ball bearings support continuous duty in ambient temperatures up to 40 °C. The 5/8 inch shaft with 1-7/8 inch length fits standard 56-frame couplings, but the 12-5/16 inch overall length may limit use in compact housings.
Highlights
- High torque for tough farm jobs
- Capacitor-start design delivers strong starting power
- TEFC enclosure protects against dust and moisture
- Dual-voltage 115/230 V suits varied wiring
- Manual thermal protection prevents overheating damage
Specifications
| Brand | DAYTON |
|---|---|
| Type | Electrical |
Questions about this item
What does 1725 RPM mean when the motor is under load?
The nameplate speed is 1725 RPM at full load on 60 Hz power.
How does the 115/230 V dual-voltage design affect wiring?
The motor runs on single-phase 115 V drawing 11.4 A or 230 V drawing 5.7 A; reconfigure leads for the voltage used.
What mounting and shaft dimensions must match my equipment?
Frame 56 with rigid base, 5/8 inch shaft diameter, 1-7/8 inch shaft length, and 12-5/16 inch overall length.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
