We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze centrifugal pump with TEFC motor, NPT ports

Dayton

Dayton 5WXU6 Centrifugal Pump 1/3 hp 115/208-230V 1 Phase 45 ft Max

SKU CH-G22V-NGBPG

Single-phase centrifugal pump with a 1/3 hp motor, bronze housing and 45 ft maximum head for water-transfer duties

  • Delivers up to 45 gpm at 5 ft head
  • Maintains 42 gpm at 10 ft head for strong mid-range output
  • Provides 38 gpm at 15 ft head for consistent higher-lift performance
  • Bronze housing resists corrosion for longer service life
  • Dual-voltage 115/208-230V motor fits common single-phase supplies

Centrifugal pump 1/3 hp 45 ft head

The Dayton 5WXU6 is a single-phase centrifugal pump rated at one-third horsepower and a maximum head of 45 feet. It operates on 115, 208 or 230 volt AC supply and fits 1-1/2 inch NPT intake and discharge connections. Bronze housing resists corrosion in typical water-transfer applications.

Sustained flow at working head

At 5 feet of head the pump delivers up to 45 gallons per minute, falling to 42 gpm at 10 feet and 38 gpm at 15 feet. At the rated 40-foot head the flow is 8 gpm, showing a steady decline as pressure increases rather than a sudden drop-off.

Bronze housing NPT connections

The totally enclosed fan-cooled motor and bronze body simplify mounting in damp environments. Installers must match the 1-1/2 inch NPT pipe threads exactly; mismatched thread sealant or undersized piping are the common causes of leaks and reduced flow.

Highlights

  • Delivers up to 45 gpm at 5 ft head
  • Maintains 42 gpm at 10 ft head for strong mid-range output
  • Provides 38 gpm at 15 ft head for consistent higher-lift performance
  • Bronze housing resists corrosion for longer service life
  • Dual-voltage 115/208-230V motor fits common single-phase supplies

Specifications

BrandDAYTON

Questions about this item

How much heat or noise does the 1/3 hp motor produce when running continuously?

The motor uses a totally enclosed fan-cooled enclosure that dissipates heat through the external fan while keeping internal components sealed from dust and moisture.

What piping and electrical supply must already be on site for this pump to operate?

You need 1-1/2 inch NPT intake and discharge piping plus a single-phase supply at either 115 V AC or 208-230 V AC.

Will the bronze housing and NPT ports connect directly to older iron or steel plumbing?

The bronze housing mates with 1-1/2 inch NPT threads on both intake and discharge, so it threads onto existing NPT pipe without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.