We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton centrifugal pump in 316 stainless steel, three phase, three quarter inch ports, three quarter hp, fifty eight gpm

Dayton

Dayton 5WXT3 Centrifugal Pump 316 Stainless Steel Three Phase 3/4 in 3/4 hp 58 gpm

SKU CH-FYKS-7QPXK

Three-phase centrifugal pump with 316 stainless steel housing and impeller delivers up to 58 gpm at 62 ft head

  • 316 stainless steel housing resists corrosion
  • Three-phase motor delivers 3/4 hp for continuous duty
  • Maximum flow reaches 58 gpm at open discharge
  • 62 ft maximum head handles high-lift applications
  • 46 gpm at 10 ft head ensures strong practical output

Dayton 316 Stainless Centrifugal Pump 3/4 hp

This Dayton centrifugal pump uses 316 stainless steel housing and a closed impeller for clean liquid transfer in industrial and commercial plumbing. It runs on three-phase power and delivers a maximum flow of 58 gpm at a maximum head of 62 ft. The 3/4 hp motor suits moderate duty cycles where corrosion resistance is required.

Three-phase power and NPT pipe limits

The unit requires a three-phase electrical supply and connects via 3/4 in NPT discharge and 1 1/4 in NPT intake fittings. Maximum shut-off pressure is 150 psi and the media temperature must not exceed 300 Degrees F. Viscosity is limited to 260 SUS, so the pump is not suited for heavy oils or slurries.

Check phase supply and piping before ordering

Verify that your facility provides three-phase power matching the motor rating. Confirm that existing pipework uses compatible NPT threads and can handle the 150 psi shut-off pressure. Ensure the liquid temperature and viscosity stay within the stated maximums for reliable operation.

Highlights

  • 316 stainless steel housing resists corrosion
  • Three-phase motor delivers 3/4 hp for continuous duty
  • Maximum flow reaches 58 gpm at open discharge
  • 62 ft maximum head handles high-lift applications
  • 46 gpm at 10 ft head ensures strong practical output

Specifications

BrandDAYTON

Questions about this item

Should I choose the 3/4 hp model or a different horsepower for my application?

This pump is rated at 3/4 hp with a maximum flow of 58 gpm and a maximum head of 62 ft; select it when those figures match your system requirements.

What does the 58 gpm maximum flow rate mean once the pump is installed?

At 10 ft of head the pump delivers up to 46 gpm; the 58 gpm figure is the theoretical maximum at zero head and will be lower in a real piping system.

How does the three-phase power requirement affect installation?

The motor requires a three-phase electrical supply; ensure your facility provides three-phase power before purchase.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.