We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray open dripproof motor body 5.6 in diameter with dripcover kit

Dayton

Dayton 5K661 3/4 hp Jet Pump Motor

SKU CH-C4XY-384Y5

A 3/4 hp capacitor-start jet pump motor with a 56J frame, open dripproof enclosure and a 5.6 in body diameter, supplied with a dripcover kit for vertical mounting

  • 3/4 hp output drives demanding jet pump applications
  • Capacitor-start design delivers strong starting torque
  • Open dripproof enclosure with dripcover kit suits vertical mounting
  • Ball bearings and Class B insulation support continuous duty
  • Dual-voltage 10.4 / 5.4-5.2 A full-load amps simplify wiring

Jet Pump Motor 3/4 hp

The Dayton 5K661 is a capacitor-start jet pump motor rated at 3/4 hp for 60 Hz operation. It uses a 56J frame with a 5.6 in body diameter and a gray finish. Ball bearings and Class B insulation support standard-efficient performance in open dripproof enclosures.

Electrical supply and mounting orientation

Verify that your installation provides either 10.4 A at the lower voltage or 5.4 to 5.2 A at the higher voltage. The motor includes a dripcover kit intended for vertical mounting and a water slinger for shaft protection. Maximum ambient temperature is 40 degrees C.

Dripcover kit and water slinger

The bundled dripcover kit enables vertical mounting without additional fabrication. The water slinger helps deflect moisture away from the bearings during pump operation. Both items are included in the box.

Highlights

  • 3/4 hp output drives demanding jet pump applications
  • Capacitor-start design delivers strong starting torque
  • Open dripproof enclosure with dripcover kit suits vertical mounting
  • Ball bearings and Class B insulation support continuous duty
  • Dual-voltage 10.4 / 5.4-5.2 A full-load amps simplify wiring

Specifications

BrandDAYTON

Questions about this item

What comes in the box with the Dayton 5K661 jet pump motor?

The motor includes a dripcover kit for vertical mounting and a water slinger.

Should I choose the 10.4 A or 5.4‑5.2 A version for my supply?

The motor is dual‑rated at 10.4 A on low voltage and 5.4‑5.2 A on high voltage, so select the wiring that matches your circuit.

What does the 3/4 hp rating mean when the motor runs at 60 Hz?

At 60 Hz the motor delivers 3/4 hp continuous output with standard efficiency and Class B insulation for 40 °C ambient temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.