We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 5K469 jet pump motor, C-face frame 56C, gray finish, open dripproof enclosure, includes dripcover kit

Dayton

Dayton 5K469 Jet Pump Motor C-Face 1 1/2 HP 56C 60 Hz

SKU CH-Q94N-34XE4

1 1/2 HP capacitor-start jet pump motor with 56C frame, open dripproof enclosure and vertical dripcover kit

  • 1 1/2 HP output drives demanding jet-pump applications
  • Capacitor-start design delivers strong starting torque
  • Open dripproof enclosure with dripcover kit suits vertical mounting
  • Ball bearings and Class B insulation handle 40 °C ambient
  • C-Face 56C frame fits standard pump flanges

Jet Pump Motor 1 1/2 HP

The Dayton 5K469 is a C-face jet pump motor rated at 1 1/2 horsepower for 60 Hz operation. It suits residential or light-commercial water systems that need a standard 56C frame. The open dripproof enclosure and gray finish are built for indoor pump rooms or sheltered outdoor locations.

Installation notes

The motor ships with a dripcover kit for vertical mounting, a water slinger and a shaft key included in the box. Ball bearings and Class B insulation simplify alignment and wiring. The open enclosure requires protection from direct spray or falling debris to avoid moisture ingress.

Capacity and headroom

Full-load current draws 18.2 amps at low voltage or 9.2 to 9.1 amps at high voltage, giving installers two wiring options. Standard-efficient design and a 40 °C maximum ambient temperature set the thermal limit for continuous duty. Buyers who need higher horsepower, a totally enclosed fan-cooled housing or three-phase power will need a different motor.

Highlights

  • 1 1/2 HP output drives demanding jet-pump applications
  • Capacitor-start design delivers strong starting torque
  • Open dripproof enclosure with dripcover kit suits vertical mounting
  • Ball bearings and Class B insulation handle 40 °C ambient
  • C-Face 56C frame fits standard pump flanges

Specifications

BrandDAYTON

Questions about this item

How can I verify the motor is running correctly after installation?

Check that the motor starts smoothly, reaches full speed without excessive noise or vibration, and that the full-load current draws near 18.2 A on low voltage or 9.1–9.2 A on high voltage while the frame temperature stays within the 40 °C ambient limit.

What components are included and what must be purchased separately?

The box contains the jet pump motor with C-face mounting, a drip-cover kit for vertical mounting, a water slinger, and a shaft key; you will need to supply the power wiring, circuit protection, mounting hardware, and the pump impeller assembly separately.

Which voltage configuration should I select for my 60 Hz supply?

The motor is dual-voltage: wire it for low voltage to draw 18.2 A full-load, or for high voltage to draw 9.1–9.2 A; choose the wiring that matches your available supply voltage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.