Dayton
Dayton 5BE56 PSC Motor 3/4 HP 1725 RPM 115/230V 48Z OAO hvac control
Permanent split capacitor motor delivers 3/4 hp at 1725 RPM on 115/230V for HVAC fan and blower duty
- 3/4 hp PSC motor powers fans and blowers efficiently
- Single-phase 115/230 V AC supply fits common residential wiring
- 1,725 RPM nameplate speed delivers steady airflow
- Auto thermal protection and Class B insulation guard against overheating
- 48Z frame with stud mounting simplifies direct replacement
Motor purpose and fit
The Dayton 5BE56 is a permanent split capacitor motor rated at three-quarter horsepower for single-phase fan and blower duty. It serves HVAC technicians and maintenance teams who need a direct-drive replacement in air-handling equipment.
Voltage and frame match
The motor runs on 115 or 230 volts AC at 60 hertz and draws 7.0 amps at the lower voltage or 3.5 amps at the higher voltage. A 48Z frame and stud mounting must match the existing housing for correct installation.
Thermal limits and continuous duty
Automatic thermal protection and Class B insulation allow continuous operation in ambients up to 40 degrees Celsius. The open air-over enclosure relies on the driven airflow for cooling, so noise and temperature stay within design limits when the blower is running.
Highlights
- 3/4 hp PSC motor powers fans and blowers efficiently
- Single-phase 115/230 V AC supply fits common residential wiring
- 1,725 RPM nameplate speed delivers steady airflow
- Auto thermal protection and Class B insulation guard against overheating
- 48Z frame with stud mounting simplifies direct replacement
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What does the 1725 RPM rating mean once the motor is installed in my HVAC unit?
The motor runs at 1725 revolutions per minute under full load, delivering 3/4 hp of continuous mechanical power for fan or blower duty.
How does the 115/230 V dual-voltage design affect the current draw and wiring?
At 115 V it draws 7.0 A full-load current; at 230 V it draws 3.5 A, so you wire the leads for the voltage available on site.
What does the 48Z frame and stud mounting mean for physical fit?
The motor uses a standard 48Z frame with stud mounting, so it bolts directly to matching HVAC housings without an adapter bracket.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
