We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminium electric drum pump with 47 in suction tube and CEE 7/7 plug

Dayton

Dayton 53RU57 electric drum pump aluminium 230 V AC 16 psi 47 in tube

SKU CH-R519-SP45E

Electric drum pump with a 47 in suction tube, self-priming operation and 16 psi maximum pressure for 230 V AC supply

  • Self-priming design starts flow instantly without manual priming
  • 47 in suction tube reaches deep drums for full extraction
  • Variable speed control adjusts output to match task needs
  • Thermal protection shuts off motor to prevent overheating
  • Runs dry capability protects pump when container empties

Application fit

The Dayton 53RU57 is an electric drum pump built for 230 V AC supply and a 47 in suction tube. It suits operators transferring fluids from standard drums where a CEE 7/7 plug matches the local mains. Buyers needing a different voltage, a shorter tube or a battery-powered unit should look elsewhere.

Sustained operation

Thermal protection allows the motor to run continuously without tripping on extended transfers. The self-priming design maintains flow after pauses, and the pump runs dry without damage. Maximum head and outlet pressure are rated at 16 psi, with oil flow up to 7 gpm under load.

Installation notes

A bung adapter is included for direct drum mounting and the 6 ft discharge hose connects to the 1 in hose barb. The 16 ft cord reaches most outlets without an extension. The manual nozzle requires operator attention during dispensing, so hands-free filling is not supported.

Highlights

  • Self-priming design starts flow instantly without manual priming
  • 47 in suction tube reaches deep drums for full extraction
  • Variable speed control adjusts output to match task needs
  • Thermal protection shuts off motor to prevent overheating
  • Runs dry capability protects pump when container empties

Specifications

BrandDAYTON

Questions about this item

Does the 230 V AC motor with thermal protection run hot or loud during continuous daily use?

Thermal protection is built in to shut the motor down if it overheats, and the 50/60 Hz AC supply keeps noise at typical electric-pump levels.

Which drum and hose fittings must I already have to connect the 1 5/8 in suction tube and 1 in discharge hose?

You need a standard 2 in bung opening for the included adapter and a 1 in inside-diameter hose for the 6 ft discharge hose.

Will the 16 psi outlet pressure work with my existing 9763-series dispensing nozzles?

The pump is rated for 16 psi max outlet pressure and is listed for use with 9763 equipment, so it matches that hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.