We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron rotary hand drum pump with long suction tube and steel discharge spout

Dayton

Dayton 40M295 Rotary Hand Drum Pump

SKU CH-97VK-DSDMM

Rotary cast-iron hand pump moves up to 8 ounces per stroke from 15 to 55 gallon drums at temperatures up to 140 degrees Fahrenheit

  • Rotary action delivers 8 oz per stroke for steady flow
  • Cast iron body with Viton seals resists corrosion and wear
  • Handles fluids up to 5,000 SUS viscosity for thick liquids
  • Fits 15 to 55 gallon drums with 41 in suction tube
  • Operates at temperatures up to 140 degrees F

Industrial rotary hand pump for drums

The Dayton 40M295 is a hand-operated rotary drum pump designed to transfer fluids from 15 to 55 gallon containers. Its cast iron construction suits industrial plumbing tasks where powered pumps are impractical or unavailable.

Cast iron build with Viton seals and steel

The pump body and wetted parts are cast iron and steel, sealed with Viton for chemical resistance. A 41 inch suction tube reaches the bottom of standard drums while the 7 inch steel discharge tube directs flow through a 1 inch OD outlet.

Manual operation limits flow to 8 ounces per stroke

Viscosity capacity tops out at 5,000 SUS and fluid temperature must not exceed 140 degrees F. The rotary action delivers a fixed volume per turn, so high-volume transfer requires sustained manual effort. California Proposition 65 warnings apply.

Highlights

  • Rotary action delivers 8 oz per stroke for steady flow
  • Cast iron body with Viton seals resists corrosion and wear
  • Handles fluids up to 5,000 SUS viscosity for thick liquids
  • Fits 15 to 55 gallon drums with 41 in suction tube
  • Operates at temperatures up to 140 degrees F

Specifications

BrandDAYTON

Questions about this item

What drum sizes does the 1-inch inlet fit?

The pump fits 15 to 55 gallon drums using the 1-inch inlet and 41-inch suction tube.

What is the discharge tube length and outlet size?

The steel discharge tube is 7 inches long with a 7/8-inch inner diameter and 1-inch outer diameter.

How is the rotary pump primed before first use?

Submerge the suction tube in the fluid then rotate the handle steadily until liquid flows from the discharge tube.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.