We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel 1/4 inch solenoid valve body three way normally open

Dayton

Dayton 3A427 1/4 in Stainless Steel Solenoid Valve Trap

SKU CH-4FS2-73XBQ MPN 3A427

A stainless steel solenoid valve body with 1/4 in pipe size, normally open three-way operation and up to 125 psi pressure rating for air, inert gas or water at temperatures up to 180 Degrees F

  • TypeDrain Components
  • 3-way design directs flow in two positions
  • stainless steel body resists corrosive environments
  • 1/4 in NPT fits standard piping
  • normally open configuration simplifies control logic
  • operates up to 125 psi air and water

1/4 in stainless steel solenoid valve trap

This 1/4 in stainless steel solenoid valve trap is a three-way, two-position valve body designed for fluid control in plumbing and industrial systems. Its normally open configuration allows flow until energised, making it suitable for automation setups that require fail-open behaviour. The stainless steel body resists corrosion in indoor and outdoor environments.

Valve body sold without coil

The unit ships as a valve body only, without a solenoid coil, so the buyer must supply a compatible coil to complete the assembly. This approach lets installers match voltage, power rating and connection type to the specific control circuit. No additional accessories or software are included in the package.

Pressure and temperature limits

The valve handles a minimum operating pressure differential of 0 psi and a maximum of 125 psi for air, inert gas and water. Fluid temperature must not exceed 180 degrees F, and the flow coefficient is rated at 0.09 and 0.12 Cv. These parameters define the practical envelope for safe, reliable operation.

Highlights

  • 3-way design directs flow in two positions
  • stainless steel body resists corrosive environments
  • 1/4 in NPT fits standard piping
  • normally open configuration simplifies control logic
  • operates up to 125 psi air and water

Specifications

TypeDrain Components
BrandDayton
Model3A427

Questions about this item

Does the 3A427 valve body need a replacement coil over time?

The 3A427 is sold as a valve body less coil, so a compatible coil must be sourced and installed before use; the coil is the wear item that will need periodic replacement.

Will the 0.12 Cv orifice restrict flow before the 125 psi pressure limit is reached?

The 0.12 Cv orifice sets the maximum flow capacity; flow demand will hit that limit well before the 125 psi pressure rating becomes a constraint.

Does the stainless body stay cool enough for continuous 180 °F fluid service?

The body is rated for fluid temperatures up to 180 °F; the stainless construction handles that heat continuously, though the separate coil will add its own heat during extended energised periods.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.