We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White industrial electric motor with cooling fins and rigid base

Dayton

Dayton 36VE86 GP Motor TEFC 3 HP 1770 rpm 1-1/8in shaft

SKU CH-55KE-R4DHY

Three-phase totally enclosed fan-cooled motor delivers 3 HP at 1770 rpm with a 1-1/8 inch keyed shaft

  • TypeTemperature Controllers
  • 3 HP motor drives demanding HVAC loads
  • TEFC enclosure protects windings in dusty or wet areas
  • 208-230/460 V three-phase suits industrial power
  • 15 service factor handles short overloads safely
  • 1770 rpm at 60 Hz matches standard fan speeds

Motor Type and Power

The Dayton 36VE86 is a three-phase general-purpose motor rated at 3 HP with a nameplate speed of 1770 rpm. It uses a totally enclosed fan-cooled design and a rigid base for horizontal mounting.

Electrical and Mechanical Details

The motor operates on 208-230/460 V at 60 Hz and draws 8.7-7.8/3.9 full-load amps. It has a 1.15 service factor, Class F insulation, ball bearings, a rolled steel frame, and a 1-1/8 inch keyed shaft.

Suitability and Limits

This unit suits industrial equipment needing a fixed-speed, horizontally mounted drive with no thermal protection. It is not for buyers who require variable-speed control, vertical mounting, or built-in overload protection.

Highlights

  • 3 HP motor drives demanding HVAC loads
  • TEFC enclosure protects windings in dusty or wet areas
  • 208-230/460 V three-phase suits industrial power
  • 15 service factor handles short overloads safely
  • 1770 rpm at 60 Hz matches standard fan speeds

Specifications

TypeTemperature Controllers

Questions about this item

What is the service factor that allows short-term overload on this 3 HP motor?

The 1.15 service factor permits temporary operation above the 3 HP nameplate rating without exceeding the Class F insulation limits.

How much current does the motor draw at full load on a 460 V supply?

Full-load current is 3.9 A at 460 V, 7.8 A at 230 V and 8.7 A at 208 V for three-phase operation.

Which voltage supply must already be available to run this motor?

A three-phase 208–230 V or 460 V, 60 Hz supply is required for the 213/5 frame motor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.