Dayton
Dayton 35Z920 Farm Motor 5 HP 1755 RPM 208-230/460V Blower
Three-phase 5 HP motor runs at 1,755 RPM on 208-230/460 V with a 1.15 service factor and totally enclosed fan-cooled frame
- 5 HP motor delivers strong power for farm equipment
- 1755 RPM provides consistent speed for blower applications
- Dual voltage 230/460V fits common three-phase supplies
- 15 service factor allows continuous duty with overload margin
- Totally enclosed fan-cooled enclosure protects against dust and moisture
Dayton 35Z920 Farm Motor 5 HP
The Dayton 35Z920 is a general purpose farm duty motor rated at 5 HP with a nameplate speed of 1755 RPM. It operates on 208-230/460V AC three-phase power at 60/50 Hz and uses an 184T frame with a rigid base for horizontal mounting. The totally enclosed fan-cooled design uses rolled steel construction and Class F insulation for continuous duty cycles.
Suited for three-phase industrial
This motor suits installations that have three-phase supply at 230/460V and need a 1.15 service factor for continuous operation. It is not for buyers who only have single-phase power available, who require built-in thermal protection, or who need a different frame size or mounting orientation than the 184T rigid base provides.
Dual-voltage 230/460V three-phase input
The critical specification is the dual-voltage three-phase input rated at 230/460V AC with full-load currents of 12.5 and 6.2 amps respectively. Verify that your supply matches this voltage and phase configuration before purchase, as the motor cannot operate on single-phase or other voltages not listed.
Highlights
- 5 HP motor delivers strong power for farm equipment
- 1755 RPM provides consistent speed for blower applications
- Dual voltage 230/460V fits common three-phase supplies
- 15 service factor allows continuous duty with overload margin
- Totally enclosed fan-cooled enclosure protects against dust and moisture
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How do I wire the 184T frame motor for 230 V or 460 V operation?
The nine-lead motor uses dual-voltage windings; connect leads for low-voltage (230 V) or high-voltage (460 V) per the nameplate diagram, verify rotation is CW/CCW as needed, and secure the rigid base on a level surface before applying power.
Which parts will need inspection or replacement during the motor's service life?
The totally enclosed fan-cooled design relies on the external shaft-driven fan and bearing lubrication; plan to clean the fan shroud, relubricate or replace the bearings, and inspect the shaft seal at regular intervals.
What thermal limit appears first when the motor runs continuously at full load?
Class F insulation with a 1.15 service factor allows a maximum ambient of 40 °C; sustained operation above that temperature or beyond the 12.5 A / 6.2 A full-load currents will trip the winding thermal limit first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
