Dayton
Dayton 35Z918 2 HP farm motor 1745 RPM 208-230/460V
Three-phase farm-duty motor delivers 2 HP at 1745 RPM with dual-voltage 208-230/460 V operation
- 2 HP output drives demanding farm equipment
- 1745 RPM nameplate speed matches common implements
- Dual-voltage 208-230/460 V fits existing three-phase supply
- 25 service factor handles temporary overloads
- Totally enclosed fan-cooled frame resists dust and moisture
Three-phase farm motor for continuous duty
The Dayton 35Z918 is a 2 HP three-phase motor built for general-purpose farm applications. It operates at 1745 RPM nameplate speed with a 1.25 service factor for sustained overload capacity. Dual-voltage 208-230/460V AC input suits standard agricultural power supplies. The 143-5T/56HZ frame fits common equipment mounting patterns.
Steady output at 40 °C ambient without thermal trips
Rated for continuous duty at up to 40 degrees C, the motor maintains full torque without automatic thermal protection shutdown. Class F insulation handles the heat rise from prolonged loading. Full-load current draws 5.7 amps at 230 V or 2.8 amps at 460 V, giving predictable current planning for branch circuits. The 1.25 service factor provides a documented margin for intermittent peak demands.
Rigid-base mounting and reversible rotation
A rolled-steel frame with totally enclosed fan-cooled enclosure resists dust, moisture and crop debris typical in barn environments. Rigid base mounting keeps alignment stable on concrete or steel foundations. The shaft rotates clockwise or counter-clockwise to match driven equipment without rewiring. Horizontal mounting position is specified for proper bearing lubrication.
Highlights
- 2 HP output drives demanding farm equipment
- 1745 RPM nameplate speed matches common implements
- Dual-voltage 208-230/460 V fits existing three-phase supply
- 25 service factor handles temporary overloads
- Totally enclosed fan-cooled frame resists dust and moisture
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How much heat and noise does the 2 HP motor produce when running continuously at 1745 RPM?
The totally enclosed fan-cooled design and Class F insulation handle continuous duty at up to 40 °C ambient; expect typical industrial motor noise and surface heat.
What voltage supply and starter gear must I already have for the 208-230/460V three-phase input?
You need a three-phase supply at 230 V or 460 V and a starter rated for 5.7 A at 230 V or 2.8 A at 460 V.
Will the 143-5T/56HZ frame and keyed shaft bolt onto my existing 56-frame fan housing?
The rigid-base 143-5T/56HZ frame matches NEMA 56 mounting dimensions, so it fits legacy 56-frame blowers with the same shaft height.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
