Dayton
Dayton 33RG84 Stainless Steel Cable 1/4 in 25 ft 7x19
304 stainless steel cable with 7x19 strand construction, 1/4 inch diameter and 25 foot length rated for 1,280 lb working load limit
- TypeTraffic & Parking Lot
- 304 stainless steel resists corrosion in outdoor environments
- 7x19 strand construction provides flexibility for easy handling
- 6,400 lbf breaking strength supports heavy lifting tasks
- 1,280 lb working load limit ensures safe operation
- 25 ft length suits traffic and parking lot applications
Cable for lifting and rigging tasks
This 1/4 inch stainless steel cable is built for lifting and general rigging where corrosion resistance matters. The 7 x 19 strand construction gives it flexibility for routing through pulleys or around corners. It suits maintenance crews, marine use and outdoor installations that need a reliable plain-end line.
Working load and breaking strength
The working load limit is 1,280 lb and the breaking strength is 6,400 lbf, providing a clear safety margin for rated lifts. A 25 ft length covers typical spans without excess slack. The 304 stainless material resists rust in wet or salty environments. The unlubricated, uncoated surface keeps the rope clean for inspection.
Plain end fits your own terminations
The plain end lets you swage, clip or splice the termination that matches your hardware. No factory fitting limits the connection method. IWRC core supports the strands under load. The silver finish makes wear and damage easy to spot during routine checks.
Highlights
- 304 stainless steel resists corrosion in outdoor environments
- 7x19 strand construction provides flexibility for easy handling
- 6,400 lbf breaking strength supports heavy lifting tasks
- 1,280 lb working load limit ensures safe operation
- 25 ft length suits traffic and parking lot applications
Specifications
| Brand | DAYTON |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
Will the 1/4 in diameter and 7 x 19 strand construction fit the existing pulleys and winches I already use?
The cable is 1/4 in overall diameter with a 7 x 19 strand construction, a common size for many pulley and winch systems. Verify your equipment specifies 1/4 in rope before installing.
How can I confirm the 304 stainless steel cable is performing to its 1,280 lb working load limit after installation?
Apply a known test load up to 1,280 lb and inspect for permanent stretch, strand distortion or end slippage. No visible deformation under that load indicates the cable is working as rated.
Does the 25 ft length arrive with any end fittings or lubrication, or must I supply thimbles, clips and lubricant myself?
The cable comes plain, unlubricated and without end fittings. You will need to provide thimbles, wire-rope clips or swaged terminals and apply lubricant if your application requires it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
