Dayton
Dayton 33RG44 1/16 in 500 ft 7x7 Orange Vinyl Cable
Galvanised steel wire rope with orange vinyl coating, 500 ft length and 96 lb working load limit
- TypeWheelbarrows & Carts
- Vinyl coating protects galvanised steel from corrosion
- 7 x 7 strand construction gives flexible handling
- 96 lb working load limit supports light lifting tasks
- 480 lbf breaking strength provides reliable safety margin
- 500 ft continuous length covers large projects without splices
Galvanised Steel Cable for General Lifting
The Dayton 33RG44 is a 500 ft length of 7 x 7 strand galvanised steel wire rope coated in orange vinyl. It is intended for lifting tasks where a visible, corrosion-resistant line is required.
Vinyl Coating and Plain Ends
The orange vinyl jacket protects the galvanised core from abrasion and weather while improving visibility on site. Plain-cut ends mean the cable must be terminated with clips, thimbles or sleeves before any load is applied.
Working Load Limit of 96 lb
The rope carries a working load limit of 96 lb against a breaking strength of 480 lbf. This capacity restricts it to light-duty hoisting, guy lines or tensioning jobs; it is not suited for overhead lifting of heavy machinery or dynamic shock loads.
Highlights
- Vinyl coating protects galvanised steel from corrosion
- 7 x 7 strand construction gives flexible handling
- 96 lb working load limit supports light lifting tasks
- 480 lbf breaking strength provides reliable safety margin
- 500 ft continuous length covers large projects without splices
Specifications
| Brand | DAYTON |
|---|---|
| Type | Wheelbarrows & Carts |
Questions about this item
What working load limit does the 7x7 galvanized steel cable support?
The 7x7 galvanized steel construction is rated for a working load limit of 96 lb and a breaking strength of 480 lbf.
What diameter clearance is needed for the 1/16 inch cable with vinyl coating?
The cable itself measures 1/16 inch and the orange vinyl coating brings the overall diameter to 1/8 inch, so allow that space for routing.
How should the plain ends be terminated for lifting use?
The ends are supplied plain and unlubricated; apply proper swaged sleeves or wire-rope clips matched to 1/16 inch diameter to develop the rated 96 lb working load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
