Dayton
Dayton 33N231 Festoon End Clamp Flat Cable 32x30x1.5mm
Festoon end clamp for flat cable on C32 x 30 x 1.5 track, galvanised steel and plastic construction
- Secures flat cables on C32 festoon systems
- Matches exact 32x30x1.5mm I-beam profile
- Fixed 1.38in height and 2.13in width grip
- Galvanised steel and plastic resists corrosion
- Prop 65 chemical warning applies to this item
Festoon End Clamp C32 × 30 × 1.5
The Dayton 33N231 is a galvanised-steel and plastic end clamp designed for flat cables running in C-track festoon systems. It fits I-beam profiles sized C32 × 30 × 1.5 mm and secures cables exactly 1.38 inches high by 2.13 inches wide. The clamp is supplied new and carries a California Proposition 65 warning for cancer and reproductive-harm substances.
Installers using flat cable in C-track
This clamp suits maintenance teams and original-equipment builders who need a fixed termination point for flat cable on the specified C-track profile. It does not accept round cables, so installations requiring round-conductor management must use a different hardware type. The single cable-size window also means it cannot accommodate thicker or thinner flat cables.
Cable envelope 1.38 in × 2.13 in
The decisive specification is the precise flat-cable envelope: height fixed at 1.38 inches and width fixed at 2.13 inches. Only cables matching both dimensions will seat correctly in the clamp on the C32 × 30 × 1.5 mm track.
Highlights
- Secures flat cables on C32 festoon systems
- Matches exact 32x30x1.5mm I-beam profile
- Fixed 1.38in height and 2.13in width grip
- Galvanised steel and plastic resists corrosion
- Prop 65 chemical warning applies to this item
Specifications
| Brand | DAYTON |
|---|
Questions about this item
Should I choose this clamp for C32 x 30 x 1.5 mm I-beam or a different size?
This end clamp fits C-Track I-beam size C32 x 30 x 1.5 mm exactly. Select it when your track matches those dimensions; otherwise choose a clamp rated for your beam.
What does the 1.38 in height mean once installed?
The clamp accepts flat cable with a fixed height of 1.38 in. Your cable must measure 1.38 in tall to seat properly in the galvanized steel and plastic jaws.
How does the C-Track interface limit the cable width I can use?
The C-Track design caps compatible flat cable width at 2.13 in. Wider cables will not fit; narrower cables will not be gripped securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
