Dayton
Dayton 33N210 Festoon System Kit, 1/4 in rope, 80 ft track, 13 trolleys
Festoon system kit with 13 nylon-wheeled trolleys on 80 ft wire-rope track for cable management
- 13 trolleys included for smooth cable management
- 80 ft track length covers long travel distances
- 1/4 in wire rope track handles 13 lb per trolley
- 98 ft minimum cable required for full 80 ft travel
- 33 ft storage length keeps system compact
Dayton 33N210 Festoon System Kit
The Dayton 33N210 festoon system kit manages cable and hose along an 80 ft wire rope track. Thirteen plastic-frame trolleys with 1.5 in nylon wheels carry the load. The kit includes clamps, hardware, trolleys and wire rope clips for a complete installation. A storage length of 5.33 ft is required when the system is retracted.
Suited for 80 ft wire rope track installations
This kit suits applications needing a wire rope track up to 80 ft long with a trolley capacity of 13 lb each. It is not for installations that exceed the 80 ft maximum track length or require a trolley capacity above 13 lb. It is not for flat cable systems, as the compatible cable type is round only.
Maximum track length 80 ft
The maximum track length is 80 ft, which also defines the maximum travel distance. This single specification determines whether the kit fits the intended span. If the required track length is longer than 80 ft, this system will not cover the distance.
Highlights
- 13 trolleys included for smooth cable management
- 80 ft track length covers long travel distances
- 1/4 in wire rope track handles 13 lb per trolley
- 98 ft minimum cable required for full 80 ft travel
- 33 ft storage length keeps system compact
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What mounting hardware and track length does the 80 ft wire rope system require?
The kit includes clamps, hardware, trolleys and wire rope clips for a minimum track length of 80 ft and a maximum travel distance of 80 ft.
How do I install the 13 nylon-wheeled trolleys on the 1/4 in wire rope, and what step is commonly missed?
Attach the supplied wire rope clips and clamps to secure the 1/4 in rope, then slide the 13 plastic-frame trolleys with 1.5 in nylon wheels onto the track; the step often missed is tightening the clips to the correct torque so the rope does not slip under load.
When will the 13 trolleys or 1/4 in wire rope need replacement, and what wear signs should I watch for?
Inspect the nylon wheels and plastic frames regularly; replace any trolley showing cracked wheels or deformed frames, and replace the wire rope if you see broken strands, corrosion or diameter reduction.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
