Dayton
Dayton 3/8 in 7x19 Galvanized Steel Cable 25 ft WLL 2880 lb
Galvanised steel cable with 7×19 construction, 25 ft length and 2,880 lb working load limit
- 3/8 in galvanized steel cable resists corrosion for outdoor durability
- 7x19 strand construction delivers flexibility with high breaking strength of 14,400 lbf
- 25 ft length provides ample reach for lifting and pulling tasks
- Working load limit of 2,880 lb supports heavy-duty industrial applications
- Vinyl coating adds abrasion resistance and protects the steel core
3/8 in 7x19 Galvanized Steel Cable 25 ft
This 25 ft length of galvanized steel cable uses a 7 x 19 strand construction with an IWRC core. It carries a working load limit of 2,880 lb and a breaking strength of 14,400 lbf. The vinyl coating brings the overall diameter to 15/32 in. It is sold new and plain-ended for lifting and pulling tasks.
Upgrade from smaller uncoated rope
Buyers moving up from thinner or uncoated wire rope gain higher capacity and corrosion resistance in one step. The jump is worth it when the application demands the 2,880 lb working load limit and a coated finish for outdoor or marine exposure. If the job only requires a lower rating or a bare metal surface, this specification adds cost without benefit.
Plain ends need proper termination
Installation relies on adding compatible fittings such as thimbles, clips or swaged terminals to the plain ends. The vinyl coating must be stripped back at each termination point so the hardware grips the steel strands directly. A common error is leaving the coating under a clip, which reduces holding power and can lead to slippage under load.
Highlights
- 3/8 in galvanized steel cable resists corrosion for outdoor durability
- 7x19 strand construction delivers flexibility with high breaking strength of 14,400 lbf
- 25 ft length provides ample reach for lifting and pulling tasks
- Working load limit of 2,880 lb supports heavy-duty industrial applications
- Vinyl coating adds abrasion resistance and protects the steel core
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What diameter thimble or shackle do I need for the 3/8 in cable?
Use hardware rated for 3/8 in wire rope; the overall diameter is 15/32 in so the fitting must accept that size.
How do I attach a load to the plain ends without weakening the 2,880 lb WLL?
Install a proper wire-rope clip or swage sleeve on each plain end; do not tie knots or use U-bolt clips sized for smaller rope.
When should I replace the cable based on the 7x19 galvanized construction?
Inspect regularly and replace if you see broken wires, corrosion under the vinyl coating, kinks, or any reduction in the 14,400 lbf breaking strength.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
