Dayton
Dayton 3/32 in 100 ft 304 SS 7x7 184 lb WLL
100 ft of 304 stainless steel 7x7 wire rope with a 184 lb working load limit and vinyl coating
- 304 stainless steel resists corrosion for long outdoor life
- Vinyl coating protects the rope from abrasion and weather
- 7x7 strand construction stays flexible over pulleys and sheaves
- 184 lb working load limit handles light lifting and rigging tasks
- 100 ft length on a single reel reduces splice points
304 Stainless Steel Cable
This Dayton wire rope is made from 304 stainless steel with a vinyl coating. It measures 3/32 in cable diameter and 1/8 in overall diameter across a 100 ft length. The 7x7 strand construction suits lifting and pulling tasks in marine or industrial settings.
184 lb Working Load Limit
The rope carries a working load limit of 184 lb and a breaking strength of 920 lbf. An IWRC core provides structural support while the plain ends require appropriate termination hardware. Unlubricated and coated, it fits rigging assemblies where corrosion resistance is needed.
Sustained Load Behaviour
Under continuous tension the vinyl coating protects the 304 stainless strands from environmental exposure. The 7x7 construction distributes stress evenly across the IWRC core during prolonged lifts. California Proposition 65 warnings apply for chemicals known to cause cancer and reproductive harm.
Highlights
- 304 stainless steel resists corrosion for long outdoor life
- Vinyl coating protects the rope from abrasion and weather
- 7x7 strand construction stays flexible over pulleys and sheaves
- 184 lb working load limit handles light lifting and rigging tasks
- 100 ft length on a single reel reduces splice points
Specifications
| Brand | Dayton |
|---|
Questions about this item
What is the working load limit for this 3/32 inch stainless steel cable?
The working load limit is 184 lb for this 304 stainless steel cable with a 7x7 strand construction.
How much heat does the vinyl coating withstand during all-day lifting use?
The vinyl-coated cable has no maximum operating temperature rating listed, so high-heat environments should be avoided.
What fittings are needed to terminate the plain ends on this 100 foot length?
The cable ends are plain with no hardware included, so you must supply your own sleeves, clips or thimbles for termination.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
