Dayton
Dayton 3/16 in 7x19 Galvanized Steel Cable 500 ft 840 lb WLL
Galvanized steel cable with 7x19 construction, 3/16 in diameter, 500 ft length, and 840 lb working load limit
- 7 x 19 strand construction delivers flexible handling for lifting tasks
- Galvanised steel with nylon coating resists corrosion during outdoor use
- 840 lb working load limit supports heavy pulling applications
- 500 ft continuous length reduces splice points on long runs
- 4 200 lbf breaking strength provides high safety margin
Dayton 3/16 in Galvanized Steel Cable
This 500 ft reel of 3/16 in diameter galvanized steel cable is built for lifting and pulling tasks. The 7x19 strand construction with an IWRC core provides flexibility and a working load limit of 840 lb. A nylon coating protects the silver-finished wire rope during use.
Suits general rigging and winching jobs
The plain ends and unlubricated surface make it ready for custom termination on site. Buyers who need a factory-fitted hook, thimble or swaged fitting should look elsewhere. The cable is not rated for overhead lifting of personnel or for applications requiring a certified bend radius.
Verify the working load limit matches your load
Confirm that 840 lb WLL and 4,200 lbf breaking strength meet the safety factor required by your relevant standard. Check that 3/16 in diameter and 1/4 in overall diameter fit your sheaves, drums and fairleads. Ensure the operating environment falls within the unspecified temperature range.
Highlights
- 7 x 19 strand construction delivers flexible handling for lifting tasks
- Galvanised steel with nylon coating resists corrosion during outdoor use
- 840 lb working load limit supports heavy pulling applications
- 500 ft continuous length reduces splice points on long runs
- 4 200 lbf breaking strength provides high safety margin
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
What hardware do I need to attach the plain ends of this 3/16 in cable?
You will need wire-rope clips, thimbles, or swage sleeves sized for 3/16 in diameter to form loops or terminate the plain ends securely.
Will the 840 lb working load limit still apply if I run this cable over older sheaves?
Yes, provided the sheave grooves match the 3/16 in diameter and are smooth; worn or undersized grooves can reduce the effective strength.
How can I confirm the 7x19 construction is intact after installation?
Inspect the cable visually along its length; a 7x19 rope shows 19 wires in each of the 7 strands, giving a flexible, smooth silver surface.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
