Dayton
Dayton 3/16 in 7x19 304 SS Wire Rope 100 ft 740 lb WLL
Stainless-steel 7×19 wire rope, 100 ft long with a 740 lb working load limit for lifting tasks
- 7 x 19 strand construction delivers flexible handling
- 304 stainless steel resists corrosion in harsh environments
- 740 lb working load limit supports heavy lifting tasks
- 3,700 lbf breaking strength provides a strong safety margin
- 100 ft continuous length covers long runs without splicing
Dayton 3/16 in 304 Stainless Steel Wire Rope
This 100 ft wire rope uses 304 stainless steel construction for corrosion resistance in marine and industrial environments. The 7 x 19 strand classification provides flexibility for routing over sheaves and through pulleys. It features an independent wire rope core and a plain end finish. The silver cable is unlubricated and uncoated.
Suited for lifting and rigging within the 740 lb
The 3,700 lbf breaking strength supports hoisting, winching and guy-wire applications where a 3/16 in diameter is specified. Buyers who need a higher working load limit or a larger diameter cable should consider a different specification. The plain ends require termination hardware before use. This rope is not intended for applications requiring pre-lubrication or a protective coating.
740 lb working load limit
This single figure defines the maximum safe load for lifting operations. The 3,700 lbf breaking strength provides the design safety factor. Exceeding the working load limit risks cable failure and injury. Verify that the application load stays at or below this rating before installation.
Highlights
- 7 x 19 strand construction delivers flexible handling
- 304 stainless steel resists corrosion in harsh environments
- 740 lb working load limit supports heavy lifting tasks
- 3,700 lbf breaking strength provides a strong safety margin
- 100 ft continuous length covers long runs without splicing
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
Will the 3/16 in 7x19 stainless cable run smoothly over my existing 304 stainless sheaves?
The 7x19 construction and 3/16 in diameter are standard for light lifting blocks; match the sheave groove to the rope diameter and keep the bend radius generous to avoid premature wear.
How can I verify the 740 lb working load limit is still valid after I install the 100 ft length?
Inspect the full 100 ft for kinks, corrosion or broken wires before first use; a clean, unlubricated 304 stainless 7x19 rope with plain ends shows no visible defects when it meets its rated 740 lb WLL.
Does the 100 ft spool of 3/16 in 7x19 304 SS wire rope include end fittings or must I buy thimbles and clips separately?
The rope is supplied with plain ends only; thimbles, wire-rope clips or swaged terminals must be purchased separately to create load-rated terminations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
