Dayton
Dayton 2VKE3 Wire Rope Stop Sleeve 5/16 in Copper Pack of 10
Copper stop sleeves secure 5/16 in wire rope with a swage fitting, supplied in a pack of 10
- TypeAngle, Pitch & Slope Locators
- Copper construction resists corrosion for long service life
- Stop-sleeve design secures wire-rope ends without slippage
- Swage fitting allows quick installation with standard tools
- 5/16 in diameter matches common rope sizes
- Pack of 10 covers multiple termination points
Copper stop sleeves for 5/16 in wire rope
These copper stop sleeves are made for 5/16 in diameter wire rope and come in a pack of ten. Each sleeve has an overall length of 5/8 in and an outside diameter of 5/8 in. They are designed as swage-type stop sleeves with a plain finish. The product is not rated for lifting applications.
Suitable for non-lifting wire rope termination
These sleeves suit users who need to terminate 5/16 in wire rope in non-lifting scenarios such as barriers, guy lines or tensioned cable runs. They are not for anyone who requires a lifting-rated fitting or a load efficiency rating. Builders needing a different rope diameter or a sleeve approved for overhead lifting should look elsewhere.
Pack of ten simplifies multiple terminations
The package quantity of ten allows several rope ends to be finished from a single pack without reordering. Having multiple sleeves on hand speeds up repetitive swaging tasks on site. The plain copper finish requires no additional coating before installation.
Highlights
- Copper construction resists corrosion for long service life
- Stop-sleeve design secures wire-rope ends without slippage
- Swage fitting allows quick installation with standard tools
- 5/16 in diameter matches common rope sizes
- Pack of 10 covers multiple termination points
Specifications
| Brand | Dayton |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
What swaging tool is required to install the 5/16 in copper stop sleeves?
A swaging tool with a 5/16 inch die set is required to compress the copper sleeve onto the wire rope.
Can the 5/16 in stop sleeves be used with galvanised wire rope already on site?
Yes, the copper sleeves are compatible with 5/16 inch diameter wire rope of any construction or coating.
How do I verify the swaged connection is secure after installation?
Inspect the sleeve for full deformation and measure the compressed diameter to confirm it matches the tool die specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
