Dayton
Dayton 2RZZ2 Galvanized Steel Cable 5/32 in 250 ft WLL 660 lb
Galvanized steel cable with a 660 lb working load limit on a 250 ft reel
- Galvanised steel resists corrosion for outdoor use
- 250 ft length covers long runs without splicing
- 660 lb working load limit handles heavy lifts safely
- 1 x 19 strand construction keeps cable flexible and strong
- 3 300 lbf breaking strength provides a wide safety margin
5/32 in Galvanized Steel Cable 250 ft
This 250 ft length of 5/32 in galvanized steel cable is built for lifting, pulling and conveying tasks where a 660 lb working load limit is sufficient. The 1 x 19 strand construction and IWRC core provide a breaking strength of 3,300 lbf. It arrives unlubricated with plain ends, so riggers must attach their own terminations before use.
Plain ends need proper termination before loading
Installation requires the user to fit suitable end fittings such as swaged sleeves, wire-rope clips or thimbles; the cable ships with no factory terminations. Because the rope is unlubricated, applying a compatible wire-rope lubricant during assembly will reduce internal friction and extend service life. A common error is exceeding the 660 lb working load limit or using damaged clips, either of which can cause sudden failure.
Suited for general rigging within the rated WLL
This cable suits workshops, farms and light-industrial sites that need a 250 ft silver galvanized steel line for straight pulls or simple lifts within the stated limits. It is not appropriate for applications requiring a pre-swaged assembly, a coated exterior, a larger diameter or a higher working load limit. Buyers needing continuous lubrication or specialised end fittings should select a different product.
Highlights
- Galvanised steel resists corrosion for outdoor use
- 250 ft length covers long runs without splicing
- 660 lb working load limit handles heavy lifts safely
- 1 x 19 strand construction keeps cable flexible and strong
- 3 300 lbf breaking strength provides a wide safety margin
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How can I confirm the 5/32 in galvanized steel cable is holding its 660 lb working load limit during a lift?
Apply the rated load gradually and watch for permanent stretch or strand distortion; the cable should return to its original length when the load is removed.
What comes with the 250 ft reel and what must I supply separately for a lifting job?
The reel contains 250 ft of 1 x 19 galvanized IWRC wire rope with plain ends; you must provide thimbles, clips, sleeves or other end fittings suited to the 660 lb WLL.
When should I choose this 5/32 in diameter cable over a different size for a 660 lb working load limit?
Select this diameter when the rigging plan calls for a 5/32 in rope with a 3,300 lbf breaking strength and a 660 lb WLL; a larger diameter would exceed the required capacity while a smaller one would fall short.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
