Dayton
Dayton 2M191 Universal AC/DC Motor 1 HP 10000 RPM 115V
Universal AC/DC motor delivers 1 HP at 10,000 RPM on 115 V single-phase power
- 1 HP universal AC/DC motor delivers high-speed performance
- 10,000 RPM nameplate speed enables rapid operation
- 115V AC voltage suits standard electrical supply
- 1 A full-load amps indicate strong power draw
- Open enclosure with face mounting fits versatile installations
Universal AC/DC Motor for 115 V Systems
The Dayton 2M191 is a single-phase universal motor rated at 1 HP with a nameplate speed of 10,000 RPM. It operates on 115 V AC at 60 Hz and draws 12.1 A at full load. The open enclosure and unfinished finish suit industrial replacement tasks where ventilation is adequate and appearance is not a concern.
Voltage Compatibility Is the Deciding Factor
This motor is not usable at 200 V or 208 V, so it only fits 115 V supplies. The CCWSE shaft rotation and 7/16 in. diameter are fixed, and the motor carries no thermal protection. Insulation class A limits the maximum ambient temperature to 40 °C, so the installation environment must stay within that range.
Face-Mount Design Simplifies Swaps
The face-mounting type allows all-angle installation without a separate base, reducing alignment time during replacement. Because thermal protection is absent, the installer must provide external overload protection. Verify the driven load matches the 1 HP rating and that the shaft rotation direction suits the application before wiring.
Highlights
- 1 HP universal AC/DC motor delivers high-speed performance
- 10,000 RPM nameplate speed enables rapid operation
- 115V AC voltage suits standard electrical supply
- 1 A full-load amps indicate strong power draw
- Open enclosure with face mounting fits versatile installations
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How does the 10,000 RPM rating translate to actual shaft speed under load?
The motor runs at 10,000 RPM nameplate speed when delivering its full 1 HP output at 115 V and 12.1 A.
What does the 115 V AC single-phase supply limit in practice?
The motor is rated for 115 V AC at 60 Hz only; it is not usable at 200 V or 208 V.
What shaft diameter and mounting face does the motor need to fit my equipment?
The shaft measures 7/16 in. diameter and the motor uses a face-mount design that can be installed at any angle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
