Dayton
Dayton 22NZ03 Industrial Power Supply 22mm 24V Amber Raised Indicator Light
22 mm amber LED panel indicator runs on 24 V AC/DC, draws 12.7 mA, and is UL listed with an IP40 rating for 25 000 hour life
- Engine BrandDAYTON
- Engine Size22mm Mounting dia
- 22mm mounting diameter fits standard industrial panels
- 24V AC/DC operation works with common control circuits
- Amber LED gives clear visual status at a glance
- 25,000-hour average life reduces replacement frequency
- UL Listed and IP40 rated for protected indoor use
Product Identity
The Dayton 22NZ03 is a 22 mm amber LED indicator light designed for industrial control panels and machinery. It suits engineers and maintenance teams who need a clear visual status signal in 24 V AC or DC systems.
Thermals Noise Power
The unit draws 12.7 mA and carries an IP40 rating for basic ingress protection. No active cooling is present so silent operation is inherent and heat output remains negligible during continuous use.
Bundled Impact
Supplied as a single raised panel light with a nylon body and polycarbonate lens. The M3.5 screw terminals allow direct wiring without extra connectors and the UL listing confirms compliance for North American installations.
Highlights
- 22mm mounting diameter fits standard industrial panels
- 24V AC/DC operation works with common control circuits
- Amber LED gives clear visual status at a glance
- 25,000-hour average life reduces replacement frequency
- UL Listed and IP40 rated for protected indoor use
Specifications
| Engine Brand | DAYTON |
|---|---|
| Engine Size | 22mm Mounting dia |
Questions about this item
How do I install the 22mm amber indicator light and what step is often missed?
Drill a 22mm mounting hole, ensure panel thickness does not exceed 0.039 in, then tighten the M3.5 screw terminals securely; the step often missed is verifying the panel is thin enough for the locking nut to engage fully.
What maintenance or replacement will the 24V amber LED indicator need over time?
The LED is rated for an average life of 25,000 hours; after that period the light output will dim and the entire sealed unit should be replaced as no internal parts are serviceable.
What limit appears first when the indicator runs continuously at 24V?
The 12.7 mA current draw and IP40 rating mean heat buildup in a sealed enclosure is the first practical limit; ensure adequate ventilation so the nylon body stays within its thermal design range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
