We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small round amber LED indicator light with flush nylon body, polycarbonate lens, brass nut, 8 mm mount, 6 V, tab terminals

Dayton

Dayton 22NY70 8 mm 6 V amber indicator light

SKU CH-ME8G-MYK2W

Flush-mount amber LED indicator fits an 8 mm panel cut-out and runs on 6 V AC/DC at 17.5 mA with a 50 000-hour rated life

  • Amber LED colour gives clear status visibility
  • 6 V AC/DC operation suits low-voltage panels
  • 8 mm mounting diameter fits tight cut-outs
  • 50 000 hour rated life reduces replacement frequency
  • IP40 and sealed IP65 options protect against dust and moisture

8 mm 6 V Amber Indicator Light

The Dayton 22NY70 is a flush-mount LED indicator with an 8 mm mounting diameter and a nylon body. It operates on 6 V AC or DC and draws 17.5 mA of current. The amber polycarbonate lens and brass nut provide a visible status signal for machinery panels.

Upgrade From Incandescent Pilot Lights

This LED unit replaces older incandescent pilot lights that require higher current and frequent bulb changes. The jump is worth it when a panel needs a 50 000-hour average life and lower heat output. It fits panels between 0.024 in and 0.055 in thick with a 0.110 in tab connection.

Sustained Operation With IP40 Seal

Under continuous load the light maintains steady output without the dimming common to aging filaments. The IP40 rating and included seal protect internal contacts from dust ingress during extended shifts. UL listing confirms compliance for industrial control circuits.

Highlights

  • Amber LED colour gives clear status visibility
  • 6 V AC/DC operation suits low-voltage panels
  • 8 mm mounting diameter fits tight cut-outs
  • 50 000 hour rated life reduces replacement frequency
  • IP40 and sealed IP65 options protect against dust and moisture

Specifications

BrandDAYTON

Questions about this item

What panel thickness range does the 8 mm mounting hole accept?

The light fits panels from 0.024 in to 0.055 in thick using the supplied brass nut.

How do you connect the 0.110 in tabs without melting the nylon body?

Crimp or solder the quick-connect tabs; keep heat brief so the nylon housing and polycarbonate lens stay intact.

When should the amber LED be replaced given its 50 000 hr rating?

Plan replacement after 50 000 hours of operation or when output noticeably dims; the sealed IP40/IP65 construction means the whole unit is swapped.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.