We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton washdown brake motor, steel frame, C-face rigid base, horizontal mount

Dayton

Dayton 1TTA1BH Washdown Motor 1-1/2 hp 3505 RPM 230/460 V AC

SKU CH-R97B-NYQTP

Three-phase washdown brake motor delivering 1.5 hp at 3505 RPM on 230/460 V AC with a 56HC frame and 1.15 service factor

  • TypeBrake Motors
  • 1-1/2 hp output powers demanding washdown applications
  • 3505 RPM speed delivers high-throughput performance
  • 230/460 V AC dual voltage suits varied plant supplies
  • Totally enclosed non-ventilated enclosure resists water ingress
  • 56HC C-face rigid base simplifies direct mounting

Three-Phase Washdown Motor

The Dayton 1TTA1BH is a three-phase washdown motor rated at 1-1/2 hp with a nameplate speed of 3505 RPM. It operates on 230/460 V AC at 60/50 Hz and is built for continuous duty in wet or hygienic environments. The totally enclosed non-ventilated steel frame carries an insulation class F rating for 40 °C maximum ambient temperature.

Dual-Voltage 230/460 V AC Input

This motor runs on either 230 V AC drawing 3.6 A or 460 V AC drawing 1.8 A at full load. The dual-voltage design lets the installer match the available supply without rewinding. A 1.15 service factor provides a modest margin above nameplate horsepower for intermittent overloads.

56HC C-Face with Rigid Base

The NEMA 56HC frame combines a C-face flange and rigid base for horizontal mounting. The shaft rotates in either direction so wiring can set CW or CCW as needed. No thermal protection is included, so external overload devices must be supplied by the installer.

Highlights

  • 1-1/2 hp output powers demanding washdown applications
  • 3505 RPM speed delivers high-throughput performance
  • 230/460 V AC dual voltage suits varied plant supplies
  • Totally enclosed non-ventilated enclosure resists water ingress
  • 56HC C-face rigid base simplifies direct mounting

Specifications

TypeBrake Motors

Questions about this item

How does the 3505 RPM nameplate speed behave under load in a real machine?

At full load the motor runs near 3505 RPM; the 1.15 service factor allows short periods above rated horsepower without overheating.

What does the 230/460 V AC dual-voltage rating mean for the supply and current draw?

The windings are configurable for 230 V or 460 V three-phase; full-load current is 3.6 A at 230 V and 1.8 A at 460 V.

What does the 56HC frame with C-face and rigid base require for mounting?

It bolts to a standard NEMA 56C face pattern and also has rigid base feet for horizontal floor mounting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.