Dayton
Dayton 1TRZ8 3/4 hp 3500 RPM 230/460V AC Brake Motor
Three-phase brake motor delivers 3/4 hp at 3500 RPM with 230/460 V AC supply and 56C frame for washdown environments
- TypeBrake Motors
- Three-phase AC power delivers efficient 3/4 hp output
- 3500 RPM speed suits high-speed machinery applications
- Dual 230/460 V voltage fits common industrial supplies
- Totally enclosed non-ventilated frame resists washdown environments
- C-face rigid base mounting simplifies horizontal installation
Washdown Brake Motor
The Dayton 1TRZ8 is a three-phase brake motor rated at 3/4 hp and 3500 RPM for 230/460V AC supply. It suits food-processing, packaging or pharmaceutical lines that need frequent stops in wet environments.
56C C-Face Mounting
A 56C frame with C-face rigid base bolts directly to gearboxes or pumps without extra adapters. Totally enclosed non-ventilated construction keeps water and chemicals out while continuous duty rating handles non-stop operation.
Replaces Ventilated Motors
The sealed enclosure upgrades open or TEFC units that fail under washdown cycles. The jump is worth it when hose-down cleaning is daily and brake holding torque must stay reliable at 40 °C ambient.
Highlights
- Three-phase AC power delivers efficient 3/4 hp output
- 3500 RPM speed suits high-speed machinery applications
- Dual 230/460 V voltage fits common industrial supplies
- Totally enclosed non-ventilated frame resists washdown environments
- C-face rigid base mounting simplifies horizontal installation
Specifications
| Type | Brake Motors |
|---|
Questions about this item
How does the 40 °C maximum ambient temperature limit continuous operation?
The motor is rated for continuous duty up to 40 °C ambient; above that temperature the insulation class F winding may exceed its thermal limit and the brake coil can overheat.
What heat or noise level should I expect when the motor runs all day at 3500 RPM?
Totally enclosed non-ventilated construction means no fan noise, but the steel frame becomes the only heat path; surface temperature will rise steadily under full 3/4 hp load.
Which starter or drive must I already have to run this 230/460 V three-phase brake motor?
A three-phase magnetic starter or VFD rated for 2.0 A at 230 V or 1.0 A at 460 V with a separate brake-coil supply is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ruland Manufacturing QCL-48-A Shaft Collar 3 in Black Anodized 6061 Aluminum
- Couplings, Collars…
Fenner Drives CT2101 Large Arch Chain Tensioner 20-60 lbf
- Tensioners & Tighte…



