We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black closed-loop timing belt, 175 teeth, 14 mm pitch, 115 mm wide, fiberglass reinforced, neoprene with nylon coating

Dayton

Dayton 1LWE9 Timing Belt 2450-14M-115 Curvilinear Collectible

SKU CH-C2NS-GZ7AT

Neoprene timing belt with 175 teeth, 14 mm pitch and 115 mm width operates from -22 to 194 degrees Fahrenheit

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • Precise 14 mm pitch drives exact timing
  • 175 teeth engage smoothly for reliable power transfer
  • Fiberglass cords reinforce strength under heavy loads
  • Nylon coating resists wear across -22 to 194 °F
  • Closed-loop 2450 mm length fits HTD systems cleanly

What this belt is and who uses it

The Dayton 1LWE9 is a Synchro-Link curvilinear timing belt built for general industrial power transmission. It suits maintenance teams and OEMs who need a closed-loop HTD profile belt with a 14 mm pitch and 115 mm top width for replacement or new drive designs.

Check your drive before ordering

Verify that the existing pulleys match the 14 mm pitch and accept a 115 mm wide belt with teeth on one side only. Confirm the required pitch length is 2,450 mm and that the 175-tooth count aligns with your centre distance. Ensure the operating environment stays between -22 °F and 194 °F for the neoprene and nylon construction.

What the materials change for you

The fiberglass reinforcing cords and nylon tooth coating resist stretch and wear while running in oil-prone or dusty conditions. Neoprene body construction handles the stated temperature range without cracking, so the belt maintains consistent meshing on HTD pulleys through repeated start-stop cycles.

Highlights

  • Precise 14 mm pitch drives exact timing
  • 175 teeth engage smoothly for reliable power transfer
  • Fiberglass cords reinforce strength under heavy loads
  • Nylon coating resists wear across -22 to 194 °F
  • Closed-loop 2450 mm length fits HTD systems cleanly

Specifications

BrandDAYTON
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

Does the Dayton 1LWE9 timing belt ship as a complete closed loop or must I buy joining hardware separately?

The belt is supplied as a single closed loop with 175 teeth already formed, so no extra joining hardware is required.

The listing shows only one pitch length — 2450 mm — so how do I know this is the correct size for my drive?

Match the 14 mm pitch, 115 mm top width and 2450 mm pitch length to your pulley specifications; those three figures define the belt size completely.

What does the 194 °F maximum operating temperature mean for continuous running in a hot enclosure?

The neoprene body with nylon tooth coating and fiberglass cords is rated for continuous operation up to 194 °F and down to -22 °F, so it will handle typical industrial enclosure heat.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.