We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black closed-loop timing belt with 150 teeth 85 mm wide

Dayton

Dayton 1LWD9 Timing Belt 2100-14M-85 Curvilinear Collectible

SKU CH-74XE-Y5M2E

A neoprene timing belt with 150 teeth, 14 mm pitch and 85 mm width rated from -22 to 194 °F

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • 150 teeth ensure precise synchronous drive
  • 14 mm pitch matches HTD profile requirements
  • 85 mm top width handles high torque loads
  • Neoprene with nylon coating resists wear
  • Fiberglass cords maintain length stability

Timing Belt 2100-14M-85

The Dayton 1LWD9 is a Synchro-Link HTD timing belt designed for general industrial power transmission. It features a neoprene body with nylon tooth coating and fiberglass reinforcing cords for strength. The closed-loop construction measures 2,100 mm in pitch length with a black finish.

Engineers specifying 14 mm pitch drives

This belt suits applications requiring a 14 mm pitch and 85 mm top width with 150 teeth on one side. It operates reliably between -22 °F and 194 °F. Builders needing a different pitch, width, tooth count, or double-sided tooth profile should select an alternative part number.

Pitch length 2,100 mm decides fit

The 2,100 mm pitch length is the critical dimension that determines whether this belt matches the centre distance and pulley combination in your drive design. Verify this exact length against your layout before ordering.

Highlights

  • 150 teeth ensure precise synchronous drive
  • 14 mm pitch matches HTD profile requirements
  • 85 mm top width handles high torque loads
  • Neoprene with nylon coating resists wear
  • Fiberglass cords maintain length stability

Specifications

BrandDAYTON
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

Will the 14 mm pitch and 85 mm width match the pulleys on my existing 2100-14M-85 drive?

Yes — the belt has a 14 mm pitch and 85 mm top width, which are the defining dimensions for a 2100-14M-85 curvilinear drive.

How can I verify the 150-tooth belt is seated correctly after installation?

Count the teeth engaging the pulley; all 150 teeth should mesh evenly with no visible gap, and the nylon-coated surface should run smoothly at operating temperature.

Does the package include tensioning hardware or only the neoprene belt?

Only the closed-loop neoprene timing belt with fiberglass reinforcement is supplied; tensioners, pulleys and mounting hardware must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.