We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black closed-loop timing belt, 85 mm wide, 115 teeth, 14 mm pitch, 1610 mm length

Dayton

Dayton 1LWC6 Timing Belt 1610-14M-85 Curvilinear Collectible

SKU CH-A6TX-2JHAS

A neoprene timing belt with fiberglass reinforcement, 115 teeth on a 14 mm pitch, 85 mm wide and rated from -22 to 194 °F

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • Neoprene construction withstands -22 to 194 °F extremes
  • Curvilinear HTD tooth profile ensures precise 14 mm pitch engagement
  • Fiberglass-reinforced cord delivers high tensile strength under load
  • 115 teeth on 1610 mm closed loop for accurate timing
  • 85 mm top width handles heavy-duty power transmission

Industrial Timing Belt 1610-14M-85

This Dayton 1LWC6 timing belt is a closed-loop HTD drive component built for general industrial power transmission. It suits maintenance engineers and OEM buyers who need a specific 14 mm pitch belt with 115 teeth for existing machinery. The neoprene body with nylon-faced teeth and fiberglass reinforcement handles continuous operation between -22 and 194 degrees F. It is not for automotive timing systems or light-duty hobby projects requiring a different tooth profile.

Neoprene Construction With Nylon Tooth Facing

The belt material combines a neoprene backbone with a nylon coating on the tooth surface to reduce wear and running noise against pulleys. Fiberglass tensile cords carry the load without stretching, keeping the 1610 mm pitch length stable over the service interval. The one-sided tooth layout and 85 mm top width match the HT series geometry, so the belt tracks correctly on compatible sprockets without additional guides or flanges.

Direct Fit On Matching HTD Pulleys

Installation consists of looping the belt over aligned pulleys and tensioning to the equipment manufacturer's specification; no tools beyond standard tension gauges are required. The most common issue is misaligned shafts or worn pulley grooves, which cause premature tooth shear or edge fraying. Verify the 14 mm pitch and 85 mm width match the drive design before fitting, as forcing an incorrect belt damages both the belt and the pulleys.

Highlights

  • Neoprene construction withstands -22 to 194 °F extremes
  • Curvilinear HTD tooth profile ensures precise 14 mm pitch engagement
  • Fiberglass-reinforced cord delivers high tensile strength under load
  • 115 teeth on 1610 mm closed loop for accurate timing
  • 85 mm top width handles heavy-duty power transmission

Specifications

BrandDAYTON
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

Will the fiberglass reinforcing cord or the nylon tooth coating need replacement first?

The fiberglass cord carries the load while the nylon coating protects tooth surfaces; both are built into the closed-loop belt so neither is separately replaceable.

Which limit appears first during continuous operation — the 194 °F maximum temperature or the 14 mm pitch meshing?

The 194 °F maximum operating temperature is the thermal ceiling; sustained running near this point ages the neoprene faster than the 14 mm pitch engagement itself.

How much heat and noise does the 85 mm wide belt generate when run all day?

The neoprene body with nylon tooth coating runs quietly; heat build-up stays within the -22 °F to 194 °F range so no extra cooling is needed for general-industry use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.