We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black closed-loop timing belt, 960 mm long, 85 mm wide, 120 teeth

Dayton

Dayton 1LVT5 Synchro-Link HTD Timing Belt 960 mm 120 Teeth 85 mm Wide

SKU CH-ZF69-4T4KX

Neoprene timing belt with 120 teeth, 960 mm pitch length and 85 mm width for industrial power transmission

  • TypeBearings, V-belts & Power Transmission Equipment
  • ColorBlack
  • Runs smoothly with 120 teeth at 8 mm pitch
  • Heat-resistant neoprene handles -22 °F to 194 °F
  • Oil-resistant nylon coating protects the belt surface
  • Fiberglass cords maintain length stability under load
  • 85 mm wide closed loop fits 960 mm pitch length

Dayton 1LVT5 Synchro-Link HTD Timing Belt

This Dayton 1LVT5 Synchro-Link HTD timing belt is a closed-loop neoprene belt reinforced with fiberglass cord and a nylon tooth coating. It suits general industrial power transmission where precise synchronous drive is required. The belt operates reliably between -22 Degrees F and 194 Degrees F with heat and oil resistance.

Installation notes for the 120-tooth belt

Fit the belt over matching 8 mm pitch HTD pulleys ensuring the 85 mm top width seats fully in the grooves. Check alignment and tension to prevent edge wear or tooth jump during start-up. The one-sided tooth profile means pulley flanges must match the belt width exactly.

Compatibility checks before ordering

Verify the existing drive uses an 8 mm pitch HTD profile and that the centre distance yields a 960 mm pitch length with 120 teeth engaged. Confirm pulley width accepts the 85 mm belt and that operating temperatures stay within the -22 to 194 Degrees F range.

Highlights

  • Runs smoothly with 120 teeth at 8 mm pitch
  • Heat-resistant neoprene handles -22 °F to 194 °F
  • Oil-resistant nylon coating protects the belt surface
  • Fiberglass cords maintain length stability under load
  • 85 mm wide closed loop fits 960 mm pitch length

Specifications

BrandDAYTON
TypeBearings, V-belts & Power Transmission Equipment
ColorBlack

Questions about this item

How do I confirm the Synchro-Link HTD belt is running correctly after installation?

Check that the 120 teeth engage smoothly with the pulleys, the 85 mm width tracks centrally without rubbing, and the belt stays within the -22 to 194 Degrees F operating range during use.

What comes in the box and what must I source separately?

The box contains the Dayton 1LVT5 timing belt only; pulleys, tensioners and any mounting hardware are not included and must be purchased separately.

Which version of this belt should I choose for my application?

Select the 960 mm pitch length, 8 mm pitch, 85 mm wide, 120-tooth HTD profile with fiberglass reinforcement and nylon coating for general industrial drives.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.