We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent plastic drum pump motor with 16 ft cord and NEMA plug

Dayton

Dayton 1DLK6 1 hp 110 V AC electric drum pump motor 8.5 A

SKU CH-J807-7X4H8

1 hp corded electric drum pump motor runs on 110 V AC, delivers 0 to 10,000 RPM variable speed, draws 8.5 A, includes 16 ft NEMA 5-15-P cord, thermal protection and 84 dB noise level

  • ColorTransparent
  • 1 hp motor delivers strong drum-pumping power
  • 110 V AC plug-in operation with 16 ft cord
  • Variable speed control from 0 to 10,000 RPM
  • Thermal protection prevents motor overload
  • 84 dB noise level suits workshop environments

Product Identity

The Dayton 1DLK6 is a corded electric drum pump motor rated at 1 hp and 110 V AC. It delivers variable speed from 0 to 10, 000 RPM with a carbon brush motor in an ODP enclosure. The unit draws 8.5 A at full load and includes thermal protection for intermittent duty cycles.

Compatibility Check

Verify that your drum pump tube is one of the listed models 1DLL1 through 1DLL4 before ordering. Ensure a 110 V AC supply with a NEMA 5-15-P receptacle is available, as the 16 ft cord terminates in that plug type. The motor is not explosion proof and operates on single phase power only.

Sustained Operation

The motor runs at an 84 dB noise level during intermittent duty cycles rather than continuous operation. Thermal protection activates if internal temperature rises too high, pausing the motor until it cools. Variable speed control allows the operator to match flow rate to the task without overloading the circuit.

Highlights

  • 1 hp motor delivers strong drum-pumping power
  • 110 V AC plug-in operation with 16 ft cord
  • Variable speed control from 0 to 10,000 RPM
  • Thermal protection prevents motor overload
  • 84 dB noise level suits workshop environments

Specifications

ColorTransparent
BrandDAYTON

Questions about this item

Does the motor come with the pump tube or do I need to buy a 1DLL series tube separately?

The motor is sold alone; a compatible 1DLL1, 1DLL2, 1DLL3 or 1DLL4 pump tube must be purchased separately.

Which pump tube model fits the chemicals I am transferring?

Choose among the 1DLL1, 1DLL2, 1DLL3 or 1DLL4 tubes based on the chemical compatibility chart for each tube material.

How does the 1 hp rating translate to flow when the motor is mounted on a drum?

The 1 hp, 8.5 A motor delivers 0 to 10,000 rpm variable speed, producing flow rates that depend on the chosen pump tube and fluid viscosity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.