We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black rubber V-belts joined side by side, wrapped fabric edges, 93.8 inches long

Dayton

Dayton 13V497 3/B90 Banded V-Belt 93-3/4

SKU CH-604T-HCND4

Three-band wrapped V-belt, 93.8 in outside length, 2 in top width, polyester cord, heat- and oil-resistant rubber compound

  • Three-band design distributes load evenly across 93.8 in length
  • Polyester cord reinforcement maintains tension under heavy industrial loads
  • Heat-resistant compound operates reliably up to 194 Degrees F
  • Oil-resistant rubber withstands lubricant exposure in machinery
  • Wrapped edge construction reduces wear in high-speed drive applications

Dayton 13V497 Banded V-Belt Overview

The Dayton 13V497 is a banded V-belt designed for industrial power transmission. It features three bands joined together for increased stability and load distribution. The belt uses a rubber compound construction with wrapped edges and polyester reinforcing cords for durability. It is suitable for machinery requiring reliable power transfer in demanding environments.

Temperature and Dimensional Limits

This belt operates within a temperature range of -22 to 194 degrees Fahrenheit. The outside length measures 93.8 inches with a top width of 2 inches and a thickness of 1/2 inch. Heat and oil resistance properties allow use in harsh conditions. Exceeding the specified temperature limits or using incorrect pulley dimensions will reduce belt life and performance.

Pre-Installation Verification Steps

Verify that your equipment requires a 3/B90 banded V-belt with the exact outside length and top width specified. Confirm the pulley grooves match the three-band configuration and belt trade size B. Ensure the operating environment stays within the stated temperature range. Check that the application does not demand specifications beyond heat and oil resistance listed here.

Highlights

  • Three-band design distributes load evenly across 93.8 in length
  • Polyester cord reinforcement maintains tension under heavy industrial loads
  • Heat-resistant compound operates reliably up to 194 Degrees F
  • Oil-resistant rubber withstands lubricant exposure in machinery
  • Wrapped edge construction reduces wear in high-speed drive applications

Specifications

No published specifications for this item yet.

Questions about this item

What does the "3/B90" designation tell me about the band count and length of this belt?

The "3" indicates three joined bands, and "B90" identifies a B-section belt with a 90-inch nominal length.

How does the 93.8-inch outside length affect fit on my drive?

The 93.8-inch outside length is the measured circumference around the belt's outer surface; compare it to your drive's required outside length to confirm fit.

What does the B-section top width of 2 inches mean for pulley compatibility?

A B-section belt has a 2-inch top width, so it requires pulleys with B-section grooves; verify your pulleys match this profile before installing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.