We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and grey variable frequency drive unit, rectangular enclosure

Dayton

Dayton 13E661 Variable Frequency Drive 1 hp 3.6 A

SKU CH-RHYV-7134R

Variable frequency drive converts 115/230 V single-phase input to 230 V three-phase output up to 1 hp and 3.6 A with 0-120 Hz range in a NEMA 1 enclosure

  • TypeMotors
  • Variable speed control from 0 to 120 Hz output range
  • Single-phase 115/230V AC input powers three-phase 230V AC motors
  • 1 hp and 3.6 A maximum output handles light industrial loads
  • NEMA 1 enclosure suits indoor mounting locations
  • Operates on both 50 and 60 Hz supply frequencies

Product Identity

The Dayton 13E661 is a variable frequency drive rated for 1 hp output and 3.6 A maximum current. It accepts single-phase 115 or 230V AC input at 50 or 60 Hz and delivers three-phase 230V AC output with a frequency range up to 120 Hz. This unit suits installers who need to run a three-phase motor from a single-phase supply.

Build and Connections

The NEMA 1 enclosure provides indoor protection against contact with live parts and falling dirt. Terminals inside the housing accommodate the single-phase supply and three-phase motor leads, allowing straightforward wiring in a panel or wall-mount arrangement. The compact black and gray case fits standard industrial environments without special mounting hardware.

Pre-Installation Checklist

Verify that your incoming service is single-phase 115 or 230V AC at 50 or 60 Hz before ordering. Confirm the motor nameplate shows three-phase 230V AC compatibility and a full-load current not exceeding 3.6 A. Ensure the installation location meets NEMA 1 indoor requirements and that local codes permit this drive for the intended application.

Highlights

  • Variable speed control from 0 to 120 Hz output range
  • Single-phase 115/230V AC input powers three-phase 230V AC motors
  • 1 hp and 3.6 A maximum output handles light industrial loads
  • NEMA 1 enclosure suits indoor mounting locations
  • Operates on both 50 and 60 Hz supply frequencies

Specifications

BrandDAYTON
TypeMotors

Questions about this item

What single-phase input voltages and frequencies does the 13E661 drive accept?

The drive accepts 115 V or 230 V AC single-phase input at either 50 Hz or 60 Hz.

What enclosure rating does the 13E661 carry, and what does that imply for mounting?

It has a NEMA 1 enclosure, meaning it is rated for indoor use and must be mounted in a clean, dry location.

How is the 13E661 wired for three-phase motor output, and what mistake do installers often make?

Connect the motor to the U, V, W output terminals for three-phase 230 V operation; a common error is leaving the output phase setting at single-phase instead of three-phase.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.