We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton capacitor-start run motor 3/4 hp 56 frame open drip proof enclosure

Dayton

Dayton 119157.00 Capacitor-Start/Run Motor 3/4 hp 115/208-230V 1725 RPM 56 Frame

SKU CH-2JY6-WJFJZ

3/4 hp single-phase capacitor-start/run motor runs at 1725 RPM on 115/208-230V AC with a 56 frame and continuous duty cycle

  • weight40.75
  • typeClosed Base
  • 3/4 hp capacitor-start/run motor delivers reliable single-phase power
  • Dual-voltage 115/208-230 V AC suits flexible wiring needs
  • 1,725 RPM at 60 Hz provides steady operating speed
  • 56 frame rigid-base design fits standard mounting patterns
  • Auto thermal protection and 1.25 service factor support continuous duty

Product Identity

The Dayton 119157.00 is a single-phase general purpose motor rated at 3/4 hp with a capacitor-start/run design. It delivers 1,725 RPM nameplate speed on a 56 frame and suits continuous-duty industrial or commercial equipment.

Installation Checks

Verify that your supply voltage matches the dual rating of 115/208-230V AC at 60 Hz and that the starter circuit can handle 6.6 A at 115V or 3.5-3.3 A at the higher voltages. Confirm the driven load does not exceed the 1.25 service factor and that the mounting surface accepts a rigid base in any orientation.

Build & Connections

The open drip-proof enclosure with closed base and Class B insulation is rated for 40 °C maximum ambient temperature. Automatic thermal protection resets after a fault, while the CW/CCW reversible shaft and all-angle mounting give flexibility for belt, direct-couple or gear-driven layouts.

Highlights

  • 3/4 hp capacitor-start/run motor delivers reliable single-phase power
  • Dual-voltage 115/208-230 V AC suits flexible wiring needs
  • 1,725 RPM at 60 Hz provides steady operating speed
  • 56 frame rigid-base design fits standard mounting patterns
  • Auto thermal protection and 1.25 service factor support continuous duty

Specifications

BrandDAYTON
weight40.75
typeClosed Base

Questions about this item

What comes in the box with the Dayton 119157.00 motor and what must I purchase separately?

The motor ships as a single unit with a rigid base and 56 frame. Capacitors, wiring, pulleys, couplings and mounting hardware are not included and must be sourced separately.

How do I decide between the 115 V and 208-230 V connections on this motor?

The motor is dual-voltage: wire it for 115 V and expect 6.6 A full-load current, or wire it for 208-230 V and expect 3.5-3.3 A. Choose the voltage that matches your supply and circuit capacity.

What does the 1725 RPM nameplate speed mean once the motor is loaded in my application?

The nameplate rating is 1725 RPM at full load with a 1.25 service factor. Under continuous duty at 40 °C ambient the motor will run at or near that speed; lighter loads will run slightly faster.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.