Dayton
Dayton 103817.00 1/4 HP 48 Frame 230/460V HVAC control
Three-phase general-purpose motor delivers 1/4 HP at 1,725 RPM in a 48 frame with 230/460V operation
- Three-phase 230/460 V AC supply suits industrial power systems
- 1/4 HP output at 1,725 RPM delivers steady torque for HVAC loads
- 48 frame with rigid base mounting fits standard equipment footprints
- 35 service factor and Class B insulation handle continuous duty cycles
- Ball bearings and steel frame construction withstand 40 °C ambient conditions
Motor Purpose And Application
The Dayton 103817.00 is a three-phase general purpose motor rated at 1/4 HP in a 48 frame size. It suits HVAC equipment and other continuous-duty industrial drives that require 230/460V AC supply at 60/50 Hz.
Electrical And Mounting Checks
Verify that your supply matches the dual-voltage rating of 230/460V and the frequency of 60/50 Hz before ordering. Confirm the rigid base mounting pattern fits the existing frame 48 footprint and that the shaft rotation direction CW/CCW meets the driven load requirement.
Build Integration And Thermal Limits
The open drip proof enclosure and Class B insulation allow operation up to a maximum ambient temperature of 40 degrees C. Ball bearings and a 1.35 service factor support continuous duty at 1,725 nameplate RPM while drawing 1.0/0.50 full load amps at nominal efficiency of 69.5 percent.
Highlights
- Three-phase 230/460 V AC supply suits industrial power systems
- 1/4 HP output at 1,725 RPM delivers steady torque for HVAC loads
- 48 frame with rigid base mounting fits standard equipment footprints
- 35 service factor and Class B insulation handle continuous duty cycles
- Ball bearings and steel frame construction withstand 40 °C ambient conditions
Specifications
| Brand | DAYTON |
|---|
Questions about this item
What is included with the motor and what must be purchased separately?
The Dayton 103817.00 motor ships as the motor unit only. Mounting hardware, wiring, conduit fittings, overload protection and any driven-equipment couplings are not included and must be sourced separately.
How do I choose between the 230 V and 460 V connections on this motor?
The motor is dual-voltage; wire the leads for 230 VAC to draw 1.0 A full-load current or for 460 VAC to draw 0.50 A. Select the voltage that matches your three-phase supply.
What does the 69.5 % nominal efficiency mean for daily operation?
At full load the motor converts roughly 69.5 % of electrical input into mechanical output; the remaining energy becomes heat, so plan ventilation for the 40 °C maximum ambient temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
