We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey industrial electric motor, rigid base, open drip-proof enclosure, shaft protruding

Dayton

Dayton 103806.00 1/2 hp Capacitor-Start/Run Machinery Motor

SKU CH-GZCC-TY8M3

Capacitor-start/run motor delivers 1/2 hp at 450 rpm on 115/208-230 V AC, 48 frame, continuous duty

  • typeClosed Base
  • Capacitor-start/run design delivers reliable single-phase starting torque
  • 1/2 hp output suits continuous-duty industrial machinery
  • Dual-voltage 115/208-230 V AC simplifies wiring across sites
  • 48-frame rigid-base mounting fits standard equipment footprints
  • Open drip-proof enclosure rated for 40 °C ambient operation

Dayton 1/2 hp Capacitor-Start/Run Motor

The Dayton 103806.00 is a single-phase general purpose motor rated at 1/2 horsepower. It operates on 115/208-230V AC at 60 Hz with a nameplate speed of 450 RPM. The motor features a 48 frame, rigid base mounting, and an open drip-proof enclosure with Class B insulation.

Suits continuous-duty industrial

This motor suits applications requiring continuous duty at a 1.25 service factor within a 40°C maximum ambient temperature. It is usable at 208V and provides reversible CW/CCW rotation. Buyers needing thermal protection, a different speed, or a voltage outside the 115/208-230V range should look at other models.

450 RPM nameplate speed determines

The fixed 450 RPM output speed is the critical specification for matching this motor to pulleys, gearboxes, or direct-drive loads. Verify that the driven equipment is designed for this exact speed before purchase.

Highlights

  • Capacitor-start/run design delivers reliable single-phase starting torque
  • 1/2 hp output suits continuous-duty industrial machinery
  • Dual-voltage 115/208-230 V AC simplifies wiring across sites
  • 48-frame rigid-base mounting fits standard equipment footprints
  • Open drip-proof enclosure rated for 40 °C ambient operation

Specifications

BrandDAYTON
typeClosed Base

Questions about this item

What is included with the Dayton 103806.00 motor and what must be purchased separately?

The motor ships as a complete 48-frame unit with an open drip-proof enclosure and rigid base. A compatible capacitor, mounting hardware, and wiring are not included and must be sourced separately.

Which voltage configuration suits my 115 V or 208-230 V supply?

The nameplate lists 115/208-230 V AC with full-load amps of 4.4 A at 115 V and 2.4-2.2 A at 208-230 V; wire the motor for the voltage present at your installation.

What does the 450 RPM rating mean when the motor is under load?

At continuous duty and 1.25 service factor the shaft turns at 450 RPM on 60 Hz power; actual speed will drop slightly as the load approaches the 1/2 hp rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.