Dayton
Dayton 1/8 in 7x19 Stainless Steel Cable 250 ft 352 lb
1/8 in 7x19 stainless steel cable on a 250 ft reel with a 352 lb working load limit
- 304 stainless steel resists corrosion in harsh environments
- 7x19 strand construction delivers flexibility for smooth operation
- 352 lb working load limit handles demanding lifting tasks
- 1,760 lbf breaking strength provides reliable safety margin
- 250 ft continuous length reduces splicing on long runs
Cable Construction and Material
This Dayton wire rope uses a 7 x 19 strand classification made from 304 stainless steel. A vinyl coating covers the core for added protection. The cable measures 1/8 in diameter with a 7/32 in overall diameter and comes in a 250 ft length.
Working Load and Usage Limits
The working load limit is 352 lb and the breaking strength is 1,760 lbf, making it suitable for general lifting and pulling tasks within those ratings. It is not intended for applications that exceed the stated load limit or require a rated bend radius. Buyers needing higher capacity or specific rigging certifications should look at alternative products.
Compatibility and Safety Checks
Verify that the 1/8 in diameter fits your sheaves, pulleys and terminations before ordering. The vinyl coating increases the overall diameter to 7/32 in, which may affect clearance in tight fittings. California Proposition 65 warnings apply for cancer and reproductive harm. Ensure the plain ends are compatible with your chosen hardware.
Highlights
- 304 stainless steel resists corrosion in harsh environments
- 7x19 strand construction delivers flexibility for smooth operation
- 352 lb working load limit handles demanding lifting tasks
- 1,760 lbf breaking strength provides reliable safety margin
- 250 ft continuous length reduces splicing on long runs
Specifications
| Brand | Dayton |
|---|
Questions about this item
What fittings do I need to terminate the plain ends of this 1/8 in cable?
Use 1/8 in stainless-steel swage sleeves or wire-rope clips rated for 7x19 construction to form eyes or thimbles on the plain ends.
Can I run this 304 stainless cable over the same 7/32 in sheaves I use for galvanised rope?
Yes, the 7/32 in overall diameter matches standard 1/8 in 7x19 groove profiles, so existing sheaves will accommodate it.
How do I confirm the 352 lb working load limit is still valid after installation?
Inspect the full 250 ft for kinks, crushed strands or vinyl-coating damage; a clean, uniform cable with properly swaged terminations meets the rated WLL.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
