Dayton
Dayton 1/4 in 50 ft 900 lb WLL 6x37 304 Stainless Steel Cable
304 stainless steel wire rope with 6x37 IWRC core rated for 900 lb working load over 50 ft
- 304 stainless steel resists corrosion in harsh environments
- 6x37 strand construction provides flexibility for rigging applications
- 900 lb working load limit supports heavy lifting tasks
- 50 ft length suits extended reach requirements
- 4,500 lbf breaking strength delivers high safety margin
Cable Overview
This 304 stainless steel wire rope is built for lifting and pulling tasks where corrosion resistance matters. The 6x37 strand construction provides flexibility while maintaining strength for industrial and marine applications. Buyers needing a lighter line or synthetic rope should look elsewhere.
Installation Notes
The plain ends require termination hardware such as thimbles, clips or swaged fittings before use. Because the cable is unlubricated, handling can leave metal residue on hands and surfaces. There is no bend radius guidance supplied, so sharp bends under load must be avoided.
Working Load Limit
The rated working load limit is 900 lb with a breaking strength of 4,500 lbf. This single figure determines whether the cable matches the force requirements of the job. Exceeding the WLL voids the design safety margin.
Highlights
- 304 stainless steel resists corrosion in harsh environments
- 6x37 strand construction provides flexibility for rigging applications
- 900 lb working load limit supports heavy lifting tasks
- 50 ft length suits extended reach requirements
- 4,500 lbf breaking strength delivers high safety margin
Specifications
| Brand | Dayton |
|---|
Questions about this item
How can I confirm the cable is safe to lift its 900 lb working load limit after installation?
Inspect the 6x37 strand construction and 304 stainless steel for kinks, corrosion or broken wires; verify the plain ends are properly terminated with rated hardware before applying any load.
What comes with the 50 ft length and what must I supply myself?
The box contains the unlubricated, uncoated 1/4 in diameter cable only; you must provide thimbles, clips, sleeves or other end fittings suited to your lifting or pulling application.
Which diameter and length combination matches the 900 lb WLL and 4,500 lbf breaking strength listed?
The 1/4 in diameter by 50 ft length in 304 stainless steel with IWRC core delivers the stated 900 lb working load limit and 4,500 lbf breaking strength.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
