Datalogic
Datalogic CAB-350 90A051230 6.5 ft RS-232 9 Pin PWR on Pin 9 pos accessory
A 6.5 ft straight RS-232 cable with 9-pin female connector and optional power on pin 9
- SpecificationCable/Connector Interface: RS-232 9 Pin PWR on Pin 9
- Cable Length6 ft.
- 5 ft cable gives flexible scanner placement
- RS-232 9-pin interface connects directly to legacy POS systems
- Power on pin 9 supplies scanner without extra adapter
- Datalogic 90A051230 built for reliable daily retail use
- Straight connector design reduces strain on port connections
Direct RS-232 link for Datalogic terminals
The CAB-350 cable provides a straight 6.5 ft RS-232 connection with a 9-pin female connector and optional power on pin 9. It suits retailers and system integrators wiring Datalogic POS scanners or terminals to a host controller.
Plug-and-play with pin-9 power option
Installation is a simple mating of the 9-pin D-sub to the host port; no drivers are required. The only common issue is forgetting that pin 9 carries optional power, which can cause a short if the host port is not wired for it.
Verify host port wiring before ordering
Check that your host device uses a standard RS-232 9-pin male port and whether it expects voltage on pin 9. Confirm the 6 ft length reaches between the mounted terminal and the host without tension.
Highlights
- 5 ft cable gives flexible scanner placement
- RS-232 9-pin interface connects directly to legacy POS systems
- Power on pin 9 supplies scanner without extra adapter
- Datalogic 90A051230 built for reliable daily retail use
- Straight connector design reduces strain on port connections
Specifications
| Brand | Datalogic |
|---|---|
| Part Number | 90A051230 |
| Specification | Cable/Connector Interface: RS-232 9 Pin PWR on Pin 9 |
| Cable Length | 6 ft. |
| Shipping weight | 0.14 kg |
| Package size | 127 × 25 × 25 mm |
Questions about this item
How can I confirm the cable is delivering power on pin 9 after connecting it?
The connector is built with power on pin 9; once the host port supplies voltage, the attached scanner will power up and enumerate on the RS-232 link.
What comes in the package and what must I source separately?
The box contains the 6.5 ft straight RS-232 cable with a 9-pin female D-sub; you must provide the host device, power supply and any mounting hardware.
Which Datalogic cable variant matches a 6.5 ft RS-232 link with power on pin 9?
Part number 90A051230 (CAB-350) is the 6.5 ft straight cable specified for RS-232 9-pin with power on pin 9.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


