We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rackmount switch, ten SFP+ ports plus two combo ports on the front

D-Link

D-Link DXS-1210-12SC 12-port 10G SFP+ network switch with 2 combo ports

SKU CH-4WHC-8D3M9 MPN DXS-1210-12SC

A 12-port 10 Gbps smart switch with 10 SFP+ ports and two 10GBASE-T/SFP+ combo ports for flexible fibre or copper uplinks

  • FormatRackmount
  • StandardsIEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T
  • Network Management TypeSmart
  • Primary Ports10 x 10G SFP+ ports 2 x 10GBASE-T/SFP+ combo ports
  • Primary Port Speed10 Gbps
  • MAC Address Table16K
  • 10 SFP+ ports plus 2 combo ports for flexible 10GbE connectivity
  • Smart management via GUI, CLI and SNMP simplifies network control
  • 16K MAC table and 9KB jumbo frames handle heavy traffic loads
  • Storm control, ACLs and Safeguard Engine protect against attacks
  • AC 100-240V input with 43.81W max draw suits standard racks

12-port 10G SFP+ switch for fibre uplinks

The D-Link DXS-1210-12SC is a rackmount smart switch with ten dedicated 10G SFP+ ports and two 10GBASE-T/SFP+ combo ports. It suits networks that need high-speed fibre aggregation and the option to connect copper links without extra transceivers. The 16K MAC address table and store-and-forward switching support growing traffic demands.

Sustained throughput with store-and-forward

Every frame is checked for errors before forwarding, preventing corrupted data from propagating under continuous load. Jumbo frames up to 9KB reduce per-packet overhead on large transfers. Static routing, 802.1Q VLAN, QoS, link aggregation and IGMP snooping keep latency predictable when multiple 10G streams run simultaneously.

Quiet 1U rack profile with 43.81 W peak draw

The 1.73" high chassis fits a standard 1U slot and uses internal fans that scale with temperature. Maximum power consumption reaches 43.81 watts while standby sits at 25.22 watts across a 100 to 240V AC input range. LEDs show link, activity, speed, power and fan status at a glance.

Highlights

  • 10 SFP+ ports plus 2 combo ports for flexible 10GbE connectivity
  • Smart management via GUI, CLI and SNMP simplifies network control
  • 16K MAC table and 9KB jumbo frames handle heavy traffic loads
  • Storm control, ACLs and Safeguard Engine protect against attacks
  • AC 100-240V input with 43.81W max draw suits standard racks

Specifications

BrandD-Link
ModelDXS-1210-12SC
FormatRackmount
StandardsIEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3az compliance
IEEE 802.3an 10GBASE-T 10GbE over copper
IEEE 802.3ae 10 GbE over fiber
IEEE 802.3z 1000BASE-X
Auto MDI / MDIX support for 1000/10GBASE-T
Network Management TypeSmart
Primary Ports10 x 10G SFP+ ports
2 x 10GBASE-T/SFP+ combo ports
Primary Port Speed10 Gbps
MAC Address Table16K
Switching MethodStore and Forward
VLAN SupportYes
Jumbo Frames9KB
SecurityBroadcast / Multicast / Unicast Storm Control
D-Link Safeguard Engine
DHCP Server Screening
IP-MAC-Port Binding
DHCP Snooping
IP Source Guard
Dynamic ARP Inspection
IPv6 Snooping
IPv6 Source Guard
DHCPv6 Guard
IPv6 ND Inspection
IPv6 Route Advertisement (RA) Guard
Traffic Segmentation
SSH
Support v1 / v2
Support IPv4 / IPv6
SSL
Support v1 / v2 / v3
Support IPv4 / IPv6
ARP Spoofing Prevention
Max. 127 entries
DoS Attack Prevention
Port Security
Supports up to 6656 MAC addresses per port
Duplicate Address Detection
PoENo
SNMPYes
QoSYes
Port MirroringYes
LEDsLink / Activity / Speed (per 10GBASE-T port)
Link / Activity / Speed (per 10G SFP+ port)
Power / Fan (per device)
PowerAC Input: 100 to 240V AC
Maximum Power Consumption: 43.81 watts
Standby Power Consumption: 25.22 watts
Dimensions1.73" x 17.36" x 8.26"
Weight6.02 lbs.
TemperatureOperating Temperature: -5 to 50 degree C (23 to 122 degree F)
Storage Temperature: -40 to 70 degree C (-40 to 158 degree F)
HumidityOperating Humidity: 0 % to 95 % non-condensing
Storage Humidity: 0 % to 95 % non-condensing
Shipping weight4.54 kg
Package size544 × 351 × 94 mm

Questions about this item

How much power does the DXS-1210-12SC draw when running continuously?

The switch has a maximum power consumption of 43.81 watts and a standby consumption of 25.22 watts, operating on 100 to 240V AC input.

Which SFP+ transceivers or copper cables are needed to use the 10 SFP+ and 2 combo ports?

You must supply compatible 10G SFP+ modules for the ten dedicated ports and either 10GBASE-T copper or SFP+ fibre modules for the two combo ports.

Will the 10GBASE-T combo ports auto-negotiate with existing 1000BASE-T devices?

Yes, the combo ports support IEEE 802.3an 10GBASE-T and IEEE 802.3ab 1000BASE-T with Auto MDI/MDIX for backward compatibility.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.