Cyclone
Cyclone Xd 5X Solid Double Margin Drill 8.80Mm
Solid double-margin drill bit cuts precise 8.80 mm holes with five-times diameter reach
- 80 mm diameter drills precise holes in tough materials
- Five-times diameter length reaches deep features without deflection
- Double margin design stabilises the tool for straighter bores
- Solid carbide construction resists wear for longer tool life
- Cyclone Xd geometry improves chip evacuation in high-performance drilling
Cyclone Xd 5X Solid Double Margin Drill 8.80 mm
This Cyclone Xd 5X Solid Double Margin Drill is a cutting tool designed for precision drilling in metal. It suits professionals and workshops that require accurate hole sizing at 8.80 mm diameter. The solid construction with double margins supports stability during operation. It is supplied new from M.A. FORD.
Who this suits and who should look elsewhere
Machinists needing an 8.80 mm drill for production or maintenance work will find this tool matches their requirement. Buyers who require a different diameter, a stepped design, or a coated variant should select another product. The Proposition 65 notice indicates chemical exposure risks that some users may wish to avoid.
Critical specification: 8.80 mm diameter
The 8.80 mm cutting diameter is the single specification that determines whether this drill fits the intended hole size. Verify the required diameter against your drawing or tap chart before purchasing.
Highlights
- 80 mm diameter drills precise holes in tough materials
- Five-times diameter length reaches deep features without deflection
- Double margin design stabilises the tool for straighter bores
- Solid carbide construction resists wear for longer tool life
- Cyclone Xd geometry improves chip evacuation in high-performance drilling
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What chuck size does the 8.80 mm Cyclone Xd 5X drill require?
The drill has an 8.80 mm diameter shank, so it fits any standard chuck that accepts 8.80 mm round shanks.
How do I install the CXDSR 0880AP bit in a drill press without damaging the double-margin flutes?
Insert the shank fully into the chuck, tighten evenly on all three jaws, and avoid side pressure while the bit seats — the double-margin design is sensitive to lateral force during clamping.
When should I replace the 8.80 mm Cyclone Xd 5X drill due to wear?
Replace it when the cutting lips show visible rounding, the double margins lose their sharp edge, or hole diameter exceeds tolerance — resharpening is possible but restores only limited life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
