Cyclone
Cyclone Xd 5X Solid Double Margin Drill 5.00Mm
A 5.00 mm solid double-margin drill built for five-times-diameter drilling depth
- Solid double margin design improves hole straightness
- 5X diameter drilling depth increases reach in one pass
- 00 mm diameter suits precise metalworking tasks
- New condition ensures full factory performance
- California Proposition 65 warning informs safe handling practices
5 mm Solid Double Margin Drill
The Cyclone Xd 5X Solid Double Margin Drill is a 5.00 mm cutting tool designed for precision holemaking in metalworking applications. It targets machinists and maintenance technicians who need consistent diameter control and extended tool life.
Double Margin Construction
The solid double margin design provides two continuous guiding surfaces that improve hole straightness and surface finish during deep drilling operations. This geometry reduces vibration and prevents the drill from wandering when entering harder alloys or cross holes.
Upgrading From Single Margin Bits
Users replacing standard single margin drills will see straighter holes and less rework on critical features. The jump is worthwhile when hole position tolerance is tight or when drilling through intersecting holes that tend to deflect a single margin tool.
Highlights
- Solid double margin design improves hole straightness
- 5X diameter drilling depth increases reach in one pass
- 00 mm diameter suits precise metalworking tasks
- New condition ensures full factory performance
- California Proposition 65 warning informs safe handling practices
Specifications
| Brand | M.A. FORD |
|---|
Questions about this item
What drill-point standard does the CXDSR 0500AP use and what material thickness does it handle?
The 5.00 mm Cyclone Xd 5X uses a solid double-margin point that self-centres in steel up to five times the drill diameter.
What shank style does the 5.00 mm Cyclone Xd 5X drill have for tool-holder fit?
It has a straight cylindrical shank sized to the 5.00 mm drill diameter for standard collets and three-jaw chucks.
How is the CXDSR 0500AP mounted in a CNC spindle and what step is often missed?
Insert the shank fully into a clean collet, torque the nut to the holder maker’s spec, and verify run-out before cutting — skipping the run-out check is the common error.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
