We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of glass-faceplate in-ear monitors with silver-plated braided cable and 3.5 mm plug

CVJ Kira Aureus IEM 10 mm 22 Ω 3.5 mm 100 g

SKU CH-MW0W-YE6TH

Wired in-ear monitors with a 10 mm dynamic driver, 22 Ω impedance, 102 dB sensitivity and a detachable 0.78 mm silver-plated cable

  • TypeIn-Ear
  • ColorKira Aureus
  • Frequency Response20 hertz
  • THDIn Ear
  • Input Impedance22 ohms
  • Signal to Noise Ratio(SNR)102 decibels
  • 10 mm dynamic driver delivers detailed sound across 20 Hz – 20 kHz
  • 22 Ω impedance pairs easily with phones and portable players
  • 102 dB sensitivity produces loud, clear output from low-power sources
  • 78 mm 2-pin detachable silver-plated cable allows quick replacement or upgrade
  • 100 g lightweight resin shell with three tip sizes ensures comfortable long sessions

Purpose and audience

The CVJ Kira Aureus are wired in-ear monitors designed for gaming, music listening and stage monitoring. A 10 mm dual-magnet dynamic driver and 22 ohm impedance make them easy to drive from portable sources while delivering a balanced signature for critical listening.

Build and connectivity

Optical-grade glass faceplates sit on lightweight resin cavities shaped from Asian ear data for pressure-free wear. A detachable silver-plated cable uses a 0.78 mm 2-pin connector and a 3.5 mm plug, so the lead can be swapped or upgraded without replacing the earpieces.

Thermals noise and power

Passive noise isolation blocks ambient sound without active circuitry, so there is no battery to charge or hiss to manage. The 102 dB sensitivity and 22 ohm load draw minimal power from a phone or laptop, running cool and silent during extended sessions.

Highlights

  • 10 mm dynamic driver delivers detailed sound across 20 Hz – 20 kHz
  • 22 Ω impedance pairs easily with phones and portable players
  • 102 dB sensitivity produces loud, clear output from low-power sources
  • 78 mm 2-pin detachable silver-plated cable allows quick replacement or upgrade
  • 100 g lightweight resin shell with three tip sizes ensures comfortable long sessions

Specifications

BrandCVJ
Series1
ModelKira Aureus
TypeIn-Ear
ColorKira Aureus
Frequency Response20 hertz
THDIn Ear
Input Impedance22 ohms
Signal to Noise Ratio(SNR)102 decibels
Sensitivity102 decibels
Connector3.5mm
Ear CouplingSingle Ear
Weight100 grams
Noise CancellingPassive
Wireless TypeIR
Microphone Impedance~2.2K ohm
Microphone Frequency Response20 hertz
Microphone Signal to Noise Ratio(SNR)102 decibels
Microphone Sensitivity102 decibels
Featurespassive_noise_cancellation, Detachable, Wired, In Ear, dynamic_driver, 22 ohm

Questions about this item

What connector does the 3.5 mm plug use and what output does it support?

The 3.5 mm plug provides a standard analogue stereo output for direct connection to any device with a matching jack.

What pin spacing does the detachable cable use for the earpiece connection?

The cable attaches via a 0.78 mm 2-pin connector on each earpiece.

How do you attach the cable correctly and what is the common mistake?

Align the 2-pin connector with the socket and push straight in; forcing it at an angle bends the pins.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.