We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical carbon filter cartridge with textured surface and branded label

Culligan International Company

Culligan International Company Carbon Filter Cartridge 9-3/4In 0.5 Mic D-40A accessory

SKU CH-2KN9-QAZ3Q

Reduces chlorine, lead, cysts and sediment at 0.5 micron with a 0.6 gpm flow rate for drinking water systems

  • Reduces chlorine and lead for cleaner drinking water with 0.5 micron carbon block filtration
  • Delivers 0.6 gpm flow rate to maintain steady water supply at the tap
  • Lasts up to 600 gallons before replacement to lower ongoing maintenance needs
  • Fits US-600A and compatible 3/8 inch connection systems for straightforward installation
  • Activated carbon media targets cysts, sediment and chemical contaminants for broad-spectrum reduction

Carbon Filter Cartridge 0.5 Micron

The Culligan D-40A carbon block cartridge fits standard 9-3/4 inch filter housings and reduces chlorine, lead, cysts, sediment and other contaminants from drinking water. It connects via a 3/8 inch fitting and suits the US-600A system.

Replaces Worn Cartridges in US-600A Systems

Swap the cartridge when flow drops or after six hundred gallons of use to restore taste and contaminant reduction. The upgrade is worth it if the current element has reached its service life or shows pressure loss.

Six Hundred Gallon Service Life

At a flow rate of 0.6 gpm the cartridge handles daily drinking and cooking needs for typical households. Capacity runs out once the rated volume is processed or if heavy sediment loads clog the 0.5 micron block prematurely.

Highlights

  • Reduces chlorine and lead for cleaner drinking water with 0.5 micron carbon block filtration
  • Delivers 0.6 gpm flow rate to maintain steady water supply at the tap
  • Lasts up to 600 gallons before replacement to lower ongoing maintenance needs
  • Fits US-600A and compatible 3/8 inch connection systems for straightforward installation
  • Activated carbon media targets cysts, sediment and chemical contaminants for broad-spectrum reduction

Specifications

BrandCULLIGAN

Questions about this item

What are the exact cartridge dimensions and connection size so I can confirm it fits my housing?

The cartridge measures 9 3/4 inches overall height with a 2 1/4 inch outside diameter and 1 inch inside diameter, and uses a 3/8 inch connection.

How do I install the D-40A cartridge and which step is commonly missed?

Shut off water supply, relieve pressure, remove old cartridge, insert new cartridge with the carbon block facing the flow direction, reassemble housing, then flush at 0.6 gpm for several minutes to clear carbon fines.

When should I replace the filter and what indicates it has reached service life?

Replace after 600 gallons of use or when flow drops noticeably; the 0.5 micron carbon block will no longer reduce chlorine, lead, cysts or particulates effectively beyond that capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.